Thermal Protector
➢If a clog prevents the normal flow of air to the motor, the thermal protector turns the motor off automatically to allow the motor to cool in order to prevent possible damage to the vacuum cleaner.
➢To correct problem, turn off and unplug vacuum cleaner, remove clogs, and/or clean/replace filters.
➢Replace full bag if necessary.
➢Wait approximately thirty (30) minutes, plug vacuum cleaner in, and turn on to see if thermal protector has reset. Thermal protector will not reset if vacuum cleaner is not turned off even if vacuum cleaner cools down.
Motor Protector
Motor Protector |
Protecteur du moteur |
Protector de motor |
➢The motor protector is located behind the wand holder on the back of the vacuum cleaner.
➢Automatically opens to provide cooling air to the motor when a clog occurs or when dust bag is full.
➢Motor protector may open when using tools.
➢Check operation by placing hand over end of hose.
➢If the motor protector opens, the vacuum cleaner will make a different sound.
➢Do not block motor protector.
- 18 -