Removing Clogs
Secondary Filter |
Screen |
Filtre secodaire
Malia secundaria
If the vacuum cleaner does not seem to have adequate suction, first check if the dust bin is full or if a filter is clogged.
➢Check the hose area.
➢Remove extension hose by grasping the hose collar, twisting, and pulling straight off.
➢Visually inspect the hose and the base area into which the hose is connected.
➢Remove any visible clog.
➢
➢Plug in the vacuum cleaner and turn it on.
➢Stretch the hose to maximum length and then allow the hose to return to its storage length.
➢Turn the vacuum cleaner off and unplug the vacuum cleaner.
➢Remove dust bin and check secondary filter screen for clogs.
➢If the dust bin and filter areas and the hose areas are free of clogs, check the nozzle area.
➢Return the vacuum cleaner to the upright position before plugging into an electrical outlet.
- 50 -