provided it contains no particles or abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.
•Next switch the shaver off and press the release buttons. Lift the shaver foil off and pull the cutter block out. Then leave the disassembled shaving parts to dry.
Alternatively, you may clean the shaver using the brush provided:
•Switch the shaver off. Press the release buttons and lift shaver foil off.
•Using the brush, clean the cutter block and the inner area of the shaver head. However, do not clean the shaver foil with the brush as this may damage the foil.
Keeping your shaver in top shape
About every four weeks, clean the cutter block with Braun cleaning agents. Put a drop of light machine oil onto the long hair trimmer and the shaver foil.
Preserving the batteries
In order to maintain the optimum capacity of the rechargeable batteries, the shaver has to be fully discharged (through normal use) every 6 months approximately. Then recharge the shaver to full capacity. Do not expose the shaver to temperatures higher than 50 °C for extended periods of time.
Replacing the shaving parts
To maintain 100% shaving performance, replace your foil and cutter block every 18 months or when worn. Change both parts at the same time for a closer shave with less skin irritation.
(Shaver foil and cutter block: part no. 4000)
Environmental notice
This appliance is provided with nickel- cadmium rechargeable batteries.
To protect the environment, do not Cd dispose of this appliance in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or appropriate collection sites.
However, if you prefer to dispose of the appliance yourself, remove the batteries as shown on page 29.
Subject to change without notice.
This product conforms to the EMC- Directive 89/336/EEC and to the Low Voltage Regulation (73/23 EEC).
Electric specifications see printing on the special cord set.
5