Braun 3546 manual Getting started, Styling, After use, Cleaning

instantly boost the temperature by pushing the «°C max» button

(4). For 20 seconds, the appliance will heat up to the maximum temperature with the backlight flashing [D]. Afterwards, the appliance switches back to the previously selected temperature.

•Safety auto off: For safety reasons, the appliance automatically switches off after 30 minutes. Five minutes prior to switching off, the display shows «Auto off» [E] along with a red/green flashing backlight. If you want to keep on straightening, simply press the «on/off» button (6) again shortly.

•Memory function: In order to make your styling session as convenient and quick as possible, the appliance stores your last personalised settings for the next usage.

Getting started

•Connect the appliance to an electrical outlet and push the «on/off» button (6) for 1 second to turn it on.

•During heat-up, the display turns red. The appliance is delivered with a default temperature setting of 160 °C. The thermometer symbol is flashing as long as the displayed temperature is not reached. [A]

•After approx. 30 seconds, the display turns green indicating that the minimum styling temperature is reached. You can start using the appliance.

•As soon as the preset temperature is reached, the thermometer symbol stops flashing [B].

Styling

Preparation

•Make sure your hair is completely dry before using the appliance.

•First, comb your hair through with a wide toothed comb to remove tangles [G].

•Section your hair off. Starting close to the roots, take a thin section of hair (strands of 3–4 cm maximum) and clamp it firmly between the styling plates [H].

How to straighten your hair

•Gently run the straightener through the entire length of the hair, slowly and steadily, from roots to the ends [I] without stopping for longer than 2 seconds. This will ensure best straightening results without damaging your hair. The styling plates (9) ensure easy and smooth gliding.

•For improved control when gliding along a strand, you may stabilise the appliance by holding it with the other hand on the cool touch points (1).

•You can create flicks at the hair ends by slowly turning the appliance either outwards or inwards before releasing a strand.

How to form curls

With the Braun satinliner, you can also create loose curls and waves (J):

–Clamp a strand at the roots,

–turn the appliance half a turn,

–then slowly move the appliance horizontally towards hair ends and the strand will turn into curl.

After use

After each use, switch off the appliance by pushing the «on/off» button (6) for 1 second.

Residual heat indicator:

As long as the appliance is not unplugged, the display turns red and shows the cooling down symbol [F] during the cooling down phase. Only when the temperature has dropped below 60 °C, the display switches off and you can touch the appliance without any risk.

Cleaning

Always unplug before cleaning. Never immerse the appliance in water.

Clean the appliance with a damp cloth and use a soft cloth to dry.

Subject to change without notice.

This product conforms to the European Directives

EMC 2004/108/EC and Low Voltage 2006/95/EC.

Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.

9