AT&T Not Availab installation instructions Transfer

Page 29

TRANSFER

To send an existing call to another extension or outside number

1Press Transfer

Green light at call appearance flutters

Present call is put on hold

You are given a new call appearance, and you hear dial tone

2Dial number where call will be transferred

You hear ringback tone

If the call is answered, remain on line and announce call if desired If not answered or if line is busy, return to held call by pressing

xxxxxwhere green light is fluttering

3Press Transfer again

Call is transferred to dialed number

23

Image 29

Contents Definity AT&T 555-015-168 Comcode 107319659 Issue 1, AugustTo Order Copies of this Document WarrantyInterference Warning Information Part 15 of FCC Rules Hearing AID CompatibilityImportant Safety Instructions Service Contents Headset or the Handset Your Callmaster Voice TerminalOrganization of this Guide Recorder InterfaceConventions Callmaster Feature DescriptionsPage To initiate a self-test of your voice terminal Headset jacks on the side of the Callmaster Checklist of Parts InstallationComcode Orderable EquipmentConnecting the Line and Optional Equipment Cords Installing the Callmaster Voice TerminalsLine jack, adjunct jack, and routing channels Important Notes on InstallationDCP Line Interface Connector Block DCP Jack InterfacePage Callmaster Labeling and Installing the BUTTON-DESIGNATION Strips Testing the Headset or HandsetInserting the designation strips Raising or Lowering Receive Volume Feature ProceduresTo raise or lower the receive volume Going OFF-HOOKDisconnecting from Calls To add another party to an existing call ConferenceHold DropMute Select Ring and Ringer VolumeTo prevent the other party from hearing you To select a personalized ringTo test the lights and ringer of your voice terminal To adjust ringer volume if necessarySELF-TEST Transfer Power Requirements Physical Dimension and WeightTechnical Description Environmental Requirements