AT&T Not Availab Technical Description, Physical Dimension and Weight, Power Requirements

Page 30

Technical Description

Physical Dimension and Weight

The CALLMASTER voice terminal can only be desk-mounted; it cannot be wall-mounted.

The CALLMASTER voice terminal measures

8.5inches deep

11.0inches wide

4.25lbs

Power Requirements

The CALLMASTER voice terminal is line powered from the PBX switch. The CALLMASTER will operate in voltage ranges of 42.5 to 56.5 volts. See the Installation section for operating range requirements.

NOTE: If adjunct equipment such as an S201A Speakerphone is connected to the CALLMASTER voice terminal’s Adjunct jack, it must be auxiliary powered.

Environmental Requirements

The CALLMASTER voice terminal can operate in temperatures ranging from 40 to 120 degrees F (4 to 48 degrees C) and relative humidity ranging from 5 to 95 percent.

Copyright © 1994 AT&T

All Rights Reserved

24

Image 30

Contents AT&T 555-015-168 Comcode 107319659 Issue 1, August DefinityWarranty To Order Copies of this DocumentHearing AID Compatibility Interference Warning Information Part 15 of FCC RulesImportant Safety Instructions Service Contents Your Callmaster Voice Terminal Headset or the HandsetRecorder Interface Organization of this GuideConventions Feature Descriptions CallmasterPage To initiate a self-test of your voice terminal Headset jacks on the side of the Callmaster Installation Checklist of PartsOrderable Equipment ComcodeInstalling the Callmaster Voice Terminals Connecting the Line and Optional Equipment CordsImportant Notes on Installation Line jack, adjunct jack, and routing channelsConnector Block DCP Jack Interface DCP Line InterfacePage Callmaster Testing the Headset or Handset Labeling and Installing the BUTTON-DESIGNATION StripsInserting the designation strips To raise or lower the receive volume Feature ProceduresRaising or Lowering Receive Volume Going OFF-HOOKDisconnecting from Calls Conference To add another party to an existing callDrop HoldTo prevent the other party from hearing you Select Ring and Ringer VolumeMute To select a personalized ringTo adjust ringer volume if necessary SELF-TESTTo test the lights and ringer of your voice terminal Transfer Technical Description Physical Dimension and WeightPower Requirements Environmental Requirements