Toshiba CIX-AG-NP-VA manual Divert Call, Modify Call, DSS Call, Hold Call

Open Architecture Interfaces

Open Architecture Links

Divert Call	Send a ringing call to another destination.
Format:	DIVERT, "CallID","Phone Number","Mbox"
	CallID = PBXCall ID of call, or if “” then Longest Ringing call
	will be assumed.
Where:	Phone Number = Inside or Outside phone number, Outside
	must have a comma – if comma is first , use Trunk Access
	Code programmed in Net Phone.
	Mbox = Voice Mailbox extension if call is going to V-mail.
Modify Call	Change or attach info to an Outside call.
Format:	MODIFY, "CallID", "Phone Number", "Name", "Acct"
	CallID = PbxCall ID of call.
Where:	Phone Number = Outside phone number.
	Name = Outside number’s name.
	Acct = Account number to be attached to the call.
DSS Call	Dial or XFR call (depending on whether the phone is on a call)
Formats:	1) DSS, KEY, "Phone Number", “Name", "Acct", XfrType
Outside Calls
	2) DSS, KEY,"Ext #", "Mbox”,"", XfrType
Internal Calls
	Phone Number = Outside phone number.
	Name = Outside number’s name.
Where:	Acct = Account number to be attached to the call.
	Ext# = Extension number.
	Mbox = Voice Mailbox extension if call is going to V-mail
	XfrType = 0 -- Allow transfer to be announced (use Centrex if
	outside to outside)
	= 1 -- Do immediate (Blind) transfer
	= 2 -- Transfer to Hole (IC destinations only)
	>= 10 -- Don't transfer (Dial only)
Hold Call	Place a call on hold.
Format:	1) HOLD
Where:

64 Strata CIX Net Phone AG 04/08