DSS Console
DSS Button
Features
The LED color indications described in these feature descriptions apply specifically to the DSS Console model DDSS3060. Flash conditions described here apply to all DSS console models.
Calling a Station
➤To call a station’s extension from a DSS console, press the DSS associated with the station.
A station call with a DSS Button can be made
DSS LEDs indicate whether the associated station is idle or busy. The LED is steady red if the station is busy or ringing, and is not lit if idle. If all the station’s PDN buttons are being used by other stations, the DSS LED of the station is lit steady red, but the station may be idle. If the station is in the Do Not Disturb mode, its DSS LED lights blinking red.
Transfer to an Idle Station
You can transfer internal or outside calls to an idle station from a DSS console.
➤To transfer a call to an idle station
1.Press the DSS button corresponding to the station to be called.
The call is placed automatically on hold. The Line LED flashes at double the on- hold rate, and the DSS LED flashes green. You hear a single ring tone. (If using the Tone signaling mode, you hear successive ring tones.)
2.Announce the call.
With Tone signaling, you would have to wait for the called station to answer before announcing the call.
3.Hang up.
The call rings the called station when you hang up. While the called station is ringing, the DSS LED is steady red, and the Line LED flashes at the
Strata CTX DKT3001/2001 Digital Single Line Telephone 01/02 | 47 |