5312/5324 IP Phones User Guide
To turn Handsfree Answerback off:
•Press the flashing (MUTE) key once. The MUTE key light turns OFF.
•To respond to a Direct Page when Handsfree Answerback is OFF, see "Direct Page – Handsfree Answerback Disabled" elsewhere in this guide.
Note: By default, Handsfree Answerback is turned OFF at your phone. If the (MUTE) key is OFF when your set is idle, Handsfree Answerback is OFF.
To answer a call using Handsfree Answerback:
Phone state before Page arrives | To answer the Direct Page | |
|
|
|
Phone is idle and MUTE is flashing | 1. | Check that MUTE is OFF. |
| 2. | Listen for the paging party. |
| 3. | Begin speaking. |
| 4. | Lift the handset if you wish to switch from a |
|
| Handsfree call to a handset call. |
You are on a handset or headset call, and | 1. | Check that MUTE is flashing. |
MUTE is OFF | 2. | Press MUTE. The light turns ON solid, and you |
|
| are now speaking to the paging party and have |
|
| muted your handset/headset call. |
| 3. | Speak to the paging party. Press MUTE to |
|
| alternate between handset/headset and |
|
| handsfree calls. |
You are on a MUTED handset/headset | The party paging you receives a busy tone. | |
call, OR, you are on a Handsfree call | Handsfree Answerback does not interrupt your call. | |
|
|
|
To end a Handsfree Answerback call:
•Press either (SPEAKER) or (CANCEL).
Note : When the Handsfree Direct Page call ends, the MUTE key light returns to the state it was in before the call was established.
Direct Paging - Handsfree Answerback Disabled
Your administrator enables or disables Handsfree Answerback and you can also turn it on or off on your phone.
To turn Handsfree Answerback off, see Direct Paging - Handsfree Answerback Enabled in this guide. When Handsfree Answerback is disabled on your phone and you receive a Direct Page, the Direct Page is indicated by a single burst of tone.
- 28 -