5312/5324 IP Phones User Guide
To make an Emergency Call using the Line Interface Module line:
1.Lift the handset.
2.Press the Line Interface Module key that you have programmed.
3.The set indicates IP FAIL: ANALOG CALL
4.Dial your Local Emergency Number.
To make an Emergency Call using the Line Interface Module line, when the IP connection has failed:
1.Lift the handset.
2.Press the Line Interface Module key that you have programmed. The set indicates IP FAIL: ANALOG CALL.
3.Dial your Local Emergency Number.
EMERGENCY CALLS WHEN EMERGENCY CALL ROUTING
PROGRAMMED
Note: This procedure is in addition to the methods described above.
To make an Emergency Call if Emergency Call Routing is programmed:
1.Lift the handset.
2.Dial your Local Emergency Number (911 or equivalent). For more information, refer to Using the Line Interface Module.
Auto–Answer
To enable or disable Auto–Answer:
•Press the programmed
To enable or disable Auto-Answer on a 5324 IP Phone only:
1.Press (MENU).
2.Press the No softkey until "Auto Answer?" appears.
3.Do one of the following:
•To enable
•To disable
- 11 -