The party paging you receives a busy tone. Handsfree Answerback does not interrupt your call.
2. Press MUTE. The light turns ON solid, and you are now speaking to the paging party and have muted your handset/headset call.
To answer a call using Handsfree Answerback:
Phone state before | To answer the Direct Page |
Page arrives |
|
Phone is idle and MUTE is flashing
1.Check that MUTE is OFF.
2.Listen for the paging party.
3.Begin speaking.
4.Lift the handset if you wish to switch from a Handsfree call to a handset call.
You are on a handset or 1. Check that MUTE is flashing. headset call, and MUTE
is OFF
3.Speak to the paging party. Press MUTE to alternate between handset/headset and handsfree calls.
You are on a MUTED handset/headset call, OR, you are on a Handsfree call
To end a Handsfree Answerback call:
zPress either 
( SPEAKER ) or 
( CANCEL ).
Note : When the Handsfree Direct Page call ends, the MUTE key light returns to the state it was in before the call was established.