Jabra 9460 user manual Using a Handset Lifter or Electronic Hookswitch, GN1000

Page 23

4.6Using a Handset Lifter or Electronic Hookswitch

With traditional desk phones, you must lift the handset (or press a desk phone headset button, if present) whenever you want to place or receive a call. However, you can automate this connection by adding one of the following:

-Jabra GN1000 Remote Handset Lifter, which will work with nearly any phone.

-An electronic hookswitch connection, which requires a supported desk phone and a phone-specific adapter from Jabra.

In the desk phone setup wizard, you can select between DHSG, MSH, Cisco or RHL adapter types.

Electronic solutions such as these enable you to answer an incoming call when away from your desk simply by pressing a button on the headset. They also tell the base when your desk phone is ringing, thereby setting the desk phone as the current target phone automatically. The GN1000 and most electronic hookswitch solutions support ring detection.

Connecting to the GN1000 Remote Handset Lifter

A remote handset lifter gives you remote call control with a Jabra PRO headset up to 150 m away from your desk. It lets you answer calls, end calls and transfer ring tones to the headset.

The GN1000 Remote Handset Lifter is an accessory available from Jabra. It is a motorized device that physically lifts the handset when you use controls of your headset or base. You can use the handset lifter with nearly any type of desk phone — including phones that also happen to have electronic hookswitch support.

Figure 19: Connecting to a GN1000 Remote Handset Lifter

To connect the Jabra PRO base to a GN1000 RHL handset lifter, follow the instructions in the desk phone setup wizard, as given below:

SELECT

1. When you

CONNECT

2. In the first

reach the

CONNECT

 

 

Electronic hookswitch

screen

Unplug handset cable

screen, shown

shown left,

left, unplug

adapter

 

select Jabra

 

handset cable.

 

 

 

GN1000.

 

 

Jabra GN1000

 

 

 

Figure 20: Select Jabra GN1000

Figure 21: Unplug handset cable

Jabra PRO 9460, Jabra PRO 9460 Duo, Jabra PRO 9465 Duo and Jabra PRO 9470 User manual

23

Image 23
Contents Jabra PRO Jabra PRO 9460 Duo Jabra PRO 9465 Duo Connecting Jabra PRO 9465 Duo or Jabra PRO 9470 To Important Safety InformationJabra PRO Touchscreen Base Noise-Cancelling Microphone Jabra PRO 9460, Jabra PRO11.3 10.2 Using Windows Sound Recorder to record a conversation11.1 11.214.4 14.114.2 14.3Introduction Jabra PRO 9460 headset also features the followingJabra PRO 9470 headset also features the following Jabra PRO Touchscreen Base FeaturesProtection level Criteria for selecting Important Safety InformationIntellitone Noise-Exposure Protection Other Specifications Care and MaintenanceProduct Overview Package ContentsJabra PRO accessories available separately Optional AccessoriesHeadset Diagrams Jabra PRO 9460 Duo and Jabra PRO 9465 Duo headset Base Diagram Setup Overview and Background System Setup and ConnectionsPreparing the base and and Assembling the Headset Quick-Start Setup WizardAdjusting the Headset Cradle Assembling the Headset Applying Power to the BaseStandard desk phone Connecting the Base to Your Desk PhoneIdentifying Your Desk Phone Features Placing the Headset in its CradleConnecting to a Standard Headset Port Connecting to a Desk Phone without a Headset PortConnecting to a Proprietary Headset Port Configuring the Jabra PRO Base for Your Desk PhoneFor Jabra PRO Desk PhoneFor Jabra PRO 9465 Duo and Jabra PRO Setting the Microphone LevelIf the Jabra PRO base cannot contact the Jabra test server Set microphone levelGN1000 Using a Handset Lifter or Electronic HookswitchConnecting to the GN1000 Remote Handset Lifter Connect Connecting to a Phone with an Electronic Hookswitch Installation completeConnecting to a Phone using RHL Mode Connecting the Base to Your ComputerConfiguring the base for your softphone Connecting to a Load-detect equipped PhoneUsing a Remote busy light Indicator Firmware Updates Installing and Running the Jabra PC SuiteJabra PC Suite Features Installing the Jabra PC SuiteJabra Firmware Updater first screen Central Administration and Mass DeploymentTarget Phone Concept Headset Controls and IndicatorsHeadset Visual and Audio Indicators Daily Use Calling, Answering and Hanging UpCalling through a Desk Phone How to make a callCalling through a Softphone If you do not have a handset lifter or electronic-hookswitchAnswering a call How to answer a callFor all other types of phone Hanging upFor desk phones without automatic ringtone detection Desk Phones Controlling the Speaker Volume and MicrophoneSwitching between Your Phone and Headset For all other types of phonesManaging Call Collisions and Call Waiting Last Number RedialCall waiting Listening to MusicHeadset Style Jabra PRO Model Wearing Style Options How to Wear the HeadsetJabra PRO Headset Attaching the ear hook Attaching or detaching a Wearing StyleAttaching the headband Detaching the headbandAttaching the neckband Detaching the ear hookHeadset Controls and Signals Function Tap Double-Tap State or event Tone description Sample Headset Signal TonesHeadset state Choosing Voice or Tones for Target indicatorsHeadset Visual Indicators LED Recharging the Headset Battery Indicators, Recharge and ReplacementBattery indicators How to replace the battery Noise Blackout Microphone Jabra PRO Staying within RangeStatus bar Base Connections and SetupUsing the Touchscreen Jabra PRO Touchscreen BaseFor MSH Users Only Standard OperationCall options menu Pairing and Connecting the Base and HeadsetPairing the Dect Base and Headset PC & Softphone Phone menuManaging Call Collision MSH phone active call screenHandling call collision Managing Call WaitingOne or more calls on hold call waiting Settings Settings MenuSetup Wizard touch here to run the whole setup wizard Advanced settings menuConference Calling Base Audio IndicatorsNarrowband vs. Wideband Audio Theft Protection Dealing with Density IssuesHeadset Docking-Operation PC Audio Web conferencingSoftphone Pseudo PC softphone call started Pairing the Base with a Mobile Phone Jabra PRO Bluetooth SupportPairing and Connecting with Other Bluetooth Devices Forcing reconnection/Disconnection via the touchscreen Managing Bluetooth ConnectionsMobile phone connection is lost Recording Your Calls Enabling the recording featureSound and Audio Devices Properties in Windows Call merging Call merging and switchingOverview what is possible? There is a third incoming call, which you accept Audio On-HOLD Call SwitchingTarget call is put on audio-hold How do I pair my headset with the Jabra PRO 9400 base? FAQs and TroubleshootingWhy doesn’t my computer detect the Jabra PRO 9400 base? Am getting a buzzing sound in my headset Hear myself when I talk using my desk phone. What can I do?What about conference calls? What is the range on the Jabra PRO 9400 solution?What is the talk time for a Jabra PRO 9400 headset? USA and Canada Getting AssistanceEurope Middle East/AfricaJabra PRO Flex Headset Technical SpecificationsAll Jabra PRO Headsets Jabra PRO Midi HeadsetMaterials and Allergies Jabra PRO 9460 Duo and Jabra PRO 9465 Duo HeadsetSHeadset Battery Headset Hearing ProtectionTouchscreen Base Product Disposal Certifications and Safety ApprovalsGlOSSARY Wideband audio USB Bluetooth adapterType 9400HS/BS RevG
Related manuals
Manual 41 pages 17.58 Kb

9460 specifications

The Jabra 9460 is a high-performance headset designed for professionals who require superior audio quality and advanced communication features. This versatile device combines the advantages of a traditional desk phone and modern wireless technology, making it a popular choice for office environments and remote work settings.

One of the standout features of the Jabra 9460 is its innovative DECT technology, which provides a reliable wireless connection with a range of up to 150 meters. This allows users to move freely around the office while staying connected to their calls. With its long battery life, typically lasting up to 12 hours of talk time, users can rely on the headset for an entire workday without needing to recharge.

The Jabra 9460 is equipped with a Noise Blackoutâ„¢ technology that ensures crystal-clear audio by eliminating background noise. This feature is essential for professionals who work in bustling environments or need to focus on their conversations without distractions. The headset also includes a high-definition audio experience, supporting wideband sound for natural voice clarity and enhanced sound performance.

Flexibility is another key characteristic of the Jabra 9460. The headset can be worn in multiple styles, including over-the-ear and on-the-head configurations. This adaptability ensures comfort for long periods of use, catering to individual preferences. Furthermore, the device includes a flexible microphone boom that can be adjusted for optimal positioning, enhancing voice pickup and clarity.

The Jabra 9460 is compatible with various communication platforms, including Microsoft Teams, Skype for Business, and other VoIP solutions. With one-touch call control buttons, users can easily manage calls, mute, or adjust volume without disruption. The integration with softphones and other communication tools streamlines workflows, improving productivity.

In addition to its impressive technical features, the Jabra 9460 boasts a sleek and professional design. Its lightweight construction ensures comfort, while the intuitive controls make it user-friendly.

Overall, the Jabra 9460 combines cutting-edge technology with user-centric design, making it an ideal choice for professionals seeking reliability, superior audio quality, and flexibility in a headset. Its combination of features addresses the demands of modern work environments, enhancing communication and collaboration among teams.