Jabra 9460 Advanced settings menu, Setup Wizard touch here to run the whole setup wizard

Page 56

-Disable / Enable audio detection: Determines whether the audio link opens automatically when sound is detected on the USB interface. The equivalent setting is available in the Audio tab for your Jabra device in Jabra Control Center. Audio detection is enabled by default.

-Wideband audio: touch here to view/change the band settings for softphone and deskphone (they are set independently of each other). If wideband is enabled, the Jabra PRO base transmits and receives wideband audio to/from the headset. See also the section “Narrowband vs. Wideband Audio” for more.

-IntelliTone: touch here to go to the settings for protecting your hearing. See also Section 2.2: Protecting your Hearing with SafeTone™ for complete details about this feature.

-Language: touch here to change the language displayed for the touchscreen text.

-Advanced: touch here to run parts or all of the setup wizard and access advanced settings. See the section “Avanced Settings menu”.

-About: touch here to view a few technical details about the base, such as firmware revision, copyright details, etc.

8.11Advanced settings menu

SETTINGS

 

ADVANCED SETTINGS

Language

 

Setup Wizard

Advanced

 

Reset Configuration

 

About

 

Setup Desk Phone

Figure 62: Accessing the Advanced Settings menu

To access the Advanced Settings menu:

1.Wait until you have no active calls and do not need the phone for a few minutes.

2.Touch the icon in the upper-right corner of the touchscreen (available only when all phones are idle).

3.The Settings menu opens. Touch on Advanced here.

4.The Advanced Settings menu opens. Select one of the following:

-Setup Wizard: touch here to run the whole setup wizard.

The first time you apply power to the base, the setup wizard runs automatically, enabling you to configure the connection to your desk phone, mobile phone and/or softphone. This menu item lets you re-run the wizard to reconfigure at any later time. The base restarts automatically if you select this item.

-Reset Configuration: touch here to reset all base settings to default and run the whole setup wizard.

-Setup Desk Phone: touch here to reset your desk phone configuration (including all clear dial-tone switch, electronic hookswitch and microphone-level settings) and run the desk phone part of the setup wizard. The rest of the configuration remains unchanged. The base restarts automatically if you select this item.

-Setup PC & Softphone: touch here to reset your softphone configuration and run the softphone part of the setup wizard. The rest of the configuration remains unchanged. The base restarts automatically if you select this item.

-Setup Mobile Phone: touch here to reset your mobile phone configuration (Jabra PRO 9465 Duo and Jabra PRO 9470 only) and run the mobile phone part of the setup wizard. The rest of the configuration remains unchanged. The base restarts automatically if you select this item.

-Headset intro: touch here to view a short series of screens that show you how to answer/end a call, adjust volume, and mute/unmute a call just using the headset. Optimal positioning of the headset microphone and rotation of the docking cradle for left ear use are also shown.

-Wireless Range: touch here to view/edit the DECT range setting. This determines the effective distance from the base for which the headset can be used. When you select this item, the touchscreen displays the three options — Normal (selected by default) Low and Very Low. The base restarts automatically if you view/edit this setting. You can choose Low or Very Low if you want to use a larger number of headsets within a given area See the section “Dealing with Density Issues” for more on density and “Staying within Range” for more on range.

This can also be set from Jabra Control Center.

Jabra PRO 9460, Jabra PRO 9460 Duo, Jabra PRO 9465 Duo and Jabra PRO 9470 User manual

56

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Jabra PRO Jabra PRO 9460 Duo Jabra PRO 9465 Duo Important Safety Information Connecting Jabra PRO 9465 Duo or Jabra PRO 9470 ToNoise-Cancelling Microphone Jabra PRO 9460, Jabra PRO Jabra PRO Touchscreen Base10.2 Using Windows Sound Recorder to record a conversation 11.111.2 11.314.1 14.214.3 14.4Jabra PRO 9460 headset also features the following Jabra PRO 9470 headset also features the followingJabra PRO Touchscreen Base Features IntroductionProtection level Criteria for selecting Important Safety InformationIntellitone Noise-Exposure Protection Care and Maintenance Other SpecificationsPackage Contents Product OverviewOptional Accessories Jabra PRO accessories available separatelyHeadset Diagrams Jabra PRO 9460 Duo and Jabra PRO 9465 Duo headset Base Diagram System Setup and Connections Setup Overview and BackgroundPreparing the base and and Assembling the Headset Quick-Start Setup WizardAdjusting the Headset Cradle Applying Power to the Base Assembling the HeadsetConnecting the Base to Your Desk Phone Identifying Your Desk Phone FeaturesPlacing the Headset in its Cradle Standard desk phoneConnecting to a Desk Phone without a Headset Port Connecting to a Standard Headset PortConfiguring the Jabra PRO Base for Your Desk Phone Connecting to a Proprietary Headset PortDesk Phone For Jabra PROSetting the Microphone Level For Jabra PRO 9465 Duo and Jabra PROSet microphone level If the Jabra PRO base cannot contact the Jabra test serverGN1000 Using a Handset Lifter or Electronic HookswitchConnecting to the GN1000 Remote Handset Lifter Connect Installation complete Connecting to a Phone with an Electronic HookswitchConnecting the Base to Your Computer Configuring the base for your softphoneConnecting to a Load-detect equipped Phone Connecting to a Phone using RHL ModeUsing a Remote busy light Indicator Installing and Running the Jabra PC Suite Jabra PC Suite FeaturesInstalling the Jabra PC Suite Firmware UpdatesCentral Administration and Mass Deployment Jabra Firmware Updater first screenHeadset Controls and Indicators Headset Visual and Audio IndicatorsDaily Use Calling, Answering and Hanging Up Target Phone ConceptHow to make a call Calling through a Desk PhoneIf you do not have a handset lifter or electronic-hookswitch Calling through a SoftphoneHow to answer a call Answering a callFor all other types of phone Hanging upFor desk phones without automatic ringtone detection Controlling the Speaker Volume and Microphone Switching between Your Phone and HeadsetFor all other types of phones Desk PhonesLast Number Redial Managing Call Collisions and Call WaitingListening to Music Call waitingHeadset Style Jabra PRO Model Wearing Style Options How to Wear the HeadsetJabra PRO Headset Attaching or detaching a Wearing Style Attaching the headbandDetaching the headband Attaching the ear hookDetaching the ear hook Attaching the neckbandHeadset Controls and Signals Function Tap Double-Tap Headset Signal Tones State or event Tone description SampleHeadset state Choosing Voice or Tones for Target indicatorsHeadset Visual Indicators LED Recharging the Headset Battery Indicators, Recharge and ReplacementBattery indicators How to replace the battery Staying within Range Noise Blackout Microphone Jabra PROBase Connections and Setup Using the TouchscreenJabra PRO Touchscreen Base Status barStandard Operation For MSH Users OnlyCall options menu Pairing and Connecting the Base and HeadsetPairing the Dect Base and Headset Phone menu PC & SoftphoneMSH phone active call screen Managing Call CollisionManaging Call Waiting Handling call collisionOne or more calls on hold call waiting Settings Menu SettingsAdvanced settings menu Setup Wizard touch here to run the whole setup wizardConference Calling Base Audio IndicatorsNarrowband vs. Wideband Audio Theft Protection Dealing with Density IssuesHeadset Docking-Operation PC Audio Web conferencingSoftphone Pseudo PC softphone call started Pairing the Base with a Mobile Phone Jabra PRO Bluetooth SupportPairing and Connecting with Other Bluetooth Devices Managing Bluetooth Connections Forcing reconnection/Disconnection via the touchscreenMobile phone connection is lost Enabling the recording feature Recording Your CallsSound and Audio Devices Properties in Windows Call merging Call merging and switchingOverview what is possible? There is a third incoming call, which you accept Call Switching Audio On-HOLDTarget call is put on audio-hold How do I pair my headset with the Jabra PRO 9400 base? FAQs and TroubleshootingWhy doesn’t my computer detect the Jabra PRO 9400 base? Hear myself when I talk using my desk phone. What can I do? Am getting a buzzing sound in my headsetWhat about conference calls? What is the range on the Jabra PRO 9400 solution?What is the talk time for a Jabra PRO 9400 headset? Getting Assistance EuropeMiddle East/Africa USA and CanadaTechnical Specifications All Jabra PRO HeadsetsJabra PRO Midi Headset Jabra PRO Flex HeadsetJabra PRO 9460 Duo and Jabra PRO 9465 Duo HeadsetS Headset BatteryHeadset Hearing Protection Materials and AllergiesTouchscreen Base Certifications and Safety Approvals Product DisposalGlOSSARY USB Bluetooth adapter Wideband audioType 9400HS/BS RevG
Related manuals
Manual 41 pages 17.58 Kb

9460 specifications

The Jabra 9460 is a high-performance headset designed for professionals who require superior audio quality and advanced communication features. This versatile device combines the advantages of a traditional desk phone and modern wireless technology, making it a popular choice for office environments and remote work settings.

One of the standout features of the Jabra 9460 is its innovative DECT technology, which provides a reliable wireless connection with a range of up to 150 meters. This allows users to move freely around the office while staying connected to their calls. With its long battery life, typically lasting up to 12 hours of talk time, users can rely on the headset for an entire workday without needing to recharge.

The Jabra 9460 is equipped with a Noise Blackout™ technology that ensures crystal-clear audio by eliminating background noise. This feature is essential for professionals who work in bustling environments or need to focus on their conversations without distractions. The headset also includes a high-definition audio experience, supporting wideband sound for natural voice clarity and enhanced sound performance.

Flexibility is another key characteristic of the Jabra 9460. The headset can be worn in multiple styles, including over-the-ear and on-the-head configurations. This adaptability ensures comfort for long periods of use, catering to individual preferences. Furthermore, the device includes a flexible microphone boom that can be adjusted for optimal positioning, enhancing voice pickup and clarity.

The Jabra 9460 is compatible with various communication platforms, including Microsoft Teams, Skype for Business, and other VoIP solutions. With one-touch call control buttons, users can easily manage calls, mute, or adjust volume without disruption. The integration with softphones and other communication tools streamlines workflows, improving productivity.

In addition to its impressive technical features, the Jabra 9460 boasts a sleek and professional design. Its lightweight construction ensures comfort, while the intuitive controls make it user-friendly.

Overall, the Jabra 9460 combines cutting-edge technology with user-centric design, making it an ideal choice for professionals seeking reliability, superior audio quality, and flexibility in a headset. Its combination of features addresses the demands of modern work environments, enhancing communication and collaboration among teams.
Top Page Image Contents