Jabra 9460 user manual Installation complete, Connecting to a Phone with an Electronic Hookswitch

Page 25

GN1000

9.

In the (third)

GN1000

10. The (fourth)

 

GN1000

GN1000

Check GN1000 manual to

 

 

 

screen, shown

Congratulations, GN1000

screen, shown

adjust ring detector

 

left, check

installation complete

left, lets you

 

 

the GN1000

 

know that

 

 

manual to

 

the setup is

 

 

adjust the

 

completed

 

 

ring detector.

 

successfully.

 

 

 

 

Just go to the

 

 

 

 

next screen.

Figure 28: Adjust the ring detector

Figure 29: A successful setup

The wizard now leads you through the clear dial-tone and mic. level configuration. See the section “Configuring the Jabra PRO Base for your Desk Phone” for more.

Connecting to a Phone with an Electronic Hookswitch

If your desk phone includes an electronic hookswitch, then you can take advantage of this feature by purchasing and installing the appropriate type of electronic hookswitch adapter for your phone. Adapter requirements can be very different between desk phone models. Please see our web site and/or refer to your telephone’s user manual for details about electronic hookswitch compatibility. You can configure the connection using either the touchscreen wizard or the Jabra PC Suite.

Figure 30: Connecting using an electronic-hookswitch adapter (Jabra LINK series)

To connect the Jabra PRO base to an electronic hookswitch port:

1.Make sure that you have purchased the correct electronic hookswitch adapter for your desk phone model from Jabra.

2.Connect the electronic hookswitch adapter as described in the cabling guide included with the adapter.

3.Configure the Jabra PRO base to communicate correctly with your model of desk phone. The required standard is clearly printed on a label attached to the hookswitch cable. The desk phone setup wizard prompts you to select this during initial setup.

4.Check the documentation for your desk phone to see which (if any) steps are required to configure your desk phone to use the electronic hookswitch.

Jabra PRO 9460, Jabra PRO 9460 Duo, Jabra PRO 9465 Duo and Jabra PRO 9470 User manual

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Jabra PRO Jabra PRO 9460 Duo Jabra PRO 9465 Duo Connecting Jabra PRO 9465 Duo or Jabra PRO 9470 To Important Safety InformationJabra PRO Touchscreen Base Noise-Cancelling Microphone Jabra PRO 9460, Jabra PRO11.1 10.2 Using Windows Sound Recorder to record a conversation11.2 11.314.2 14.114.3 14.4Jabra PRO 9470 headset also features the following Jabra PRO 9460 headset also features the followingJabra PRO Touchscreen Base Features IntroductionIntellitone Noise-Exposure Protection Important Safety InformationProtection level Criteria for selecting Other Specifications Care and MaintenanceProduct Overview Package ContentsJabra PRO accessories available separately Optional AccessoriesHeadset Diagrams Jabra PRO 9460 Duo and Jabra PRO 9465 Duo headset Base Diagram Setup Overview and Background System Setup and ConnectionsAdjusting the Headset Cradle Quick-Start Setup WizardPreparing the base and and Assembling the Headset Assembling the Headset Applying Power to the BaseIdentifying Your Desk Phone Features Connecting the Base to Your Desk PhonePlacing the Headset in its Cradle Standard desk phoneConnecting to a Standard Headset Port Connecting to a Desk Phone without a Headset PortConnecting to a Proprietary Headset Port Configuring the Jabra PRO Base for Your Desk PhoneFor Jabra PRO Desk PhoneFor Jabra PRO 9465 Duo and Jabra PRO Setting the Microphone LevelIf the Jabra PRO base cannot contact the Jabra test server Set microphone levelConnecting to the GN1000 Remote Handset Lifter Using a Handset Lifter or Electronic HookswitchGN1000 Connect Connecting to a Phone with an Electronic Hookswitch Installation completeConfiguring the base for your softphone Connecting the Base to Your ComputerConnecting to a Load-detect equipped Phone Connecting to a Phone using RHL ModeUsing a Remote busy light Indicator Jabra PC Suite Features Installing and Running the Jabra PC SuiteInstalling the Jabra PC Suite Firmware UpdatesJabra Firmware Updater first screen Central Administration and Mass DeploymentHeadset Visual and Audio Indicators Headset Controls and IndicatorsDaily Use Calling, Answering and Hanging Up Target Phone ConceptCalling through a Desk Phone How to make a callCalling through a Softphone If you do not have a handset lifter or electronic-hookswitchAnswering a call How to answer a callFor desk phones without automatic ringtone detection Hanging upFor all other types of phone Switching between Your Phone and Headset Controlling the Speaker Volume and MicrophoneFor all other types of phones Desk PhonesManaging Call Collisions and Call Waiting Last Number RedialCall waiting Listening to MusicJabra PRO Headset How to Wear the HeadsetHeadset Style Jabra PRO Model Wearing Style Options Attaching the headband Attaching or detaching a Wearing StyleDetaching the headband Attaching the ear hookAttaching the neckband Detaching the ear hookHeadset Controls and Signals Function Tap Double-Tap State or event Tone description Sample Headset Signal TonesHeadset Visual Indicators LED Choosing Voice or Tones for Target indicatorsHeadset state Battery indicators Battery Indicators, Recharge and ReplacementRecharging the Headset How to replace the battery Noise Blackout Microphone Jabra PRO Staying within RangeUsing the Touchscreen Base Connections and SetupJabra PRO Touchscreen Base Status barFor MSH Users Only Standard OperationPairing the Dect Base and Headset Pairing and Connecting the Base and HeadsetCall options menu PC & Softphone Phone menuManaging Call Collision MSH phone active call screenHandling call collision Managing Call WaitingOne or more calls on hold call waiting Settings Settings MenuSetup Wizard touch here to run the whole setup wizard Advanced settings menuNarrowband vs. Wideband Audio Base Audio IndicatorsConference Calling Headset Docking-Operation Dealing with Density IssuesTheft Protection Softphone Web conferencingPC Audio Pseudo PC softphone call started Pairing and Connecting with Other Bluetooth Devices Jabra PRO Bluetooth SupportPairing the Base with a Mobile Phone Forcing reconnection/Disconnection via the touchscreen Managing Bluetooth ConnectionsMobile phone connection is lost Recording Your Calls Enabling the recording featureSound and Audio Devices Properties in Windows Overview what is possible? Call merging and switchingCall merging There is a third incoming call, which you accept Audio On-HOLD Call SwitchingTarget call is put on audio-hold Why doesn’t my computer detect the Jabra PRO 9400 base? FAQs and TroubleshootingHow do I pair my headset with the Jabra PRO 9400 base? Am getting a buzzing sound in my headset Hear myself when I talk using my desk phone. What can I do?What is the talk time for a Jabra PRO 9400 headset? What is the range on the Jabra PRO 9400 solution?What about conference calls? Europe Getting AssistanceMiddle East/Africa USA and CanadaAll Jabra PRO Headsets Technical SpecificationsJabra PRO Midi Headset Jabra PRO Flex HeadsetHeadset Battery Jabra PRO 9460 Duo and Jabra PRO 9465 Duo HeadsetSHeadset Hearing Protection Materials and AllergiesTouchscreen Base Product Disposal Certifications and Safety ApprovalsGlOSSARY Wideband audio USB Bluetooth adapterType 9400HS/BS RevG
Related manuals
Manual 41 pages 17.58 Kb

9460 specifications

The Jabra 9460 is a high-performance headset designed for professionals who require superior audio quality and advanced communication features. This versatile device combines the advantages of a traditional desk phone and modern wireless technology, making it a popular choice for office environments and remote work settings.

One of the standout features of the Jabra 9460 is its innovative DECT technology, which provides a reliable wireless connection with a range of up to 150 meters. This allows users to move freely around the office while staying connected to their calls. With its long battery life, typically lasting up to 12 hours of talk time, users can rely on the headset for an entire workday without needing to recharge.

The Jabra 9460 is equipped with a Noise Blackout™ technology that ensures crystal-clear audio by eliminating background noise. This feature is essential for professionals who work in bustling environments or need to focus on their conversations without distractions. The headset also includes a high-definition audio experience, supporting wideband sound for natural voice clarity and enhanced sound performance.

Flexibility is another key characteristic of the Jabra 9460. The headset can be worn in multiple styles, including over-the-ear and on-the-head configurations. This adaptability ensures comfort for long periods of use, catering to individual preferences. Furthermore, the device includes a flexible microphone boom that can be adjusted for optimal positioning, enhancing voice pickup and clarity.

The Jabra 9460 is compatible with various communication platforms, including Microsoft Teams, Skype for Business, and other VoIP solutions. With one-touch call control buttons, users can easily manage calls, mute, or adjust volume without disruption. The integration with softphones and other communication tools streamlines workflows, improving productivity.

In addition to its impressive technical features, the Jabra 9460 boasts a sleek and professional design. Its lightweight construction ensures comfort, while the intuitive controls make it user-friendly.

Overall, the Jabra 9460 combines cutting-edge technology with user-centric design, making it an ideal choice for professionals seeking reliability, superior audio quality, and flexibility in a headset. Its combination of features addresses the demands of modern work environments, enhancing communication and collaboration among teams.
Top Page Image Contents