INSERTING A PAUSE IN THE
DIALING SEQUENCE
Press the RE/PA button to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example after you dial 9 for an outside line, or to wait for a computer access tone). Each pause counts as 1 digit in the dialing sequence.
REVIEWING AND DELETING
STORED NUMBERS
1.Make sure the phone is OFF.
2.Press MEMORY.
3.Use the CID REVIEW arrow buttons (or REVIEW on the base) to scroll through the numbers stored in memory until the desired number is shown.
4.While the entry is displayed, press DELETE to delete the entry. The display shows DELETE?
5.Press DELETE again to delete the entry.
INT | HOLD |
|
| TALK |
|
DIAL | FORMAT PGM/MUTE DELETE | DELETE |
|
| |
|
| button |
1 | ABC2 DEF3 |
|
GHI4 JKL5 MNO6
PQRS7 TUV8 WXYZ9
TONE* OPER0 #
CHANNEL RE/PA MEMORY FLASH
RE/PA button
MEMORY button
35