WALL MOUNT INSTALLATION
Because it is necessary to charge the handset for 12 hours prior to connecting the phone for use the first time, it is better to leave the unit on a flat surface during initial charge before attempting to hang it on the wall.
1.Make sure the wall mount bracket is securely fastened.
2.Set RINGER switch (on both the handset and the base) to ON.
3.Place the handset in the base.
4.Connect the power supply cord into the base and the other end into an AC outlet. The CHARGE/ IN USE light comes on, indicating the battery is charging.
Allow the phone to charge for 12 hours before using the first time. If you don't charge the phone properly when you first set up the phone, perfomance of the battery will be compromised.
(Installation continued on the following page.)
2 3
4
21
CAUTION: Use only the Thomson
7