Vertical Communications DXP Series, FX Series manual Using The Other Telephone Features GCA70-258

Page 60

Using The Other Telephone Features

GCA70–258

∙There are eight headset loudness levels. Set the level for the current call as follows:

1.While on a call and in headset mode, press the VOLUME UP or VOLUME DOWN button once for each change in loudness you desire.

NOTE: On telephone models 8024S-** and 8012S-** your installer may have turned on the “high handset volume” feature, providing 13 handset/headset volume levels instead of 8.

∙To set a permanent group listening, speaker, headset, or handset loudness level for all future calls,

1.Press INTERCOM.

2.Activate speaker, headset, handset, or group listen mode that you want to affect.

3.While in that mode, press the VOLUME UP or VOLUME DOWN button to adjust loudness.

4.Dial ✳ ✳ 7 or press a preprogrammed SAVE button to hold the loudness at the last setting for all future calls (until you change the default again).

5.Repeat this procedure in each mode until you have set all default volume levels.

9 – 8 LCD Speakerphone Station User's Guide

Image 60

Contents DXP, DXP Plus, and FX Series Digital Communications Systems System Models Contents Transferring Calls Conferencing CallsProgramming Your Telephone Operating Your Telephone With a DSS/BLF Console This page remains blank intentionally Introducing The Telephone Understanding What The Lights MeanIntroducing The Telephone GCA70-258 Using The LCD Abbreviations Abbreviation Feature DefinitionCallbk Have Hold NoANSPriv Using Your Speakerphone Using a Full-Duplex SpeakerphoneSpeakerphone User Guidelines ∙ To manually place a call using your speakerphone ∙ To automatically dial a number using your speakerphone∙ To answer a call with your speakerphone Impact 8024S Impact SCS 8312S ∙ To adjust the pedestal ∙ To answer a call using the speakerphone Answering CallsAnswering Calls ∙ To answer a call ringing at your telephoneAnswering a Subdued Off Hook Voice Announcement Sohva Press Intercom∙ To respond verbally ∙ To respond non-verballyForwarding Calls ∙ To forward calls made to your station∙ To cancel call forwarding Accessing Lines ∙ To access outside lines using the line group featureMaking Calls Making a Call∙ To cancel queuing before it rings back at your telephone ∙ To queue for a line group if all lines are busy∙ To answer queuing ring-back Using Last Number Redial Using The Automatic Redial Feature ∙ To cancel the automatic redial feature Using Speed Dial Using Dial By Name ∙ To use Dial By NameMaking a Subdued Off-Hook Voice Announcement Sohva Making a Paging Announcement ∙ To send a paging announcement∙ To reply to a meet-mepage ∙ To activate call waiting when you hear a busy signal ∙ To cancel call waiting∙ To cancel the camp-on condition at any time ∙ When you hear five short tone bursts Press Intercom ∙ To camp on at any busy stationHolding Calls ∙ To cancel directed call hold and retrieve the call ∙ To retrieve a held call at another station∙ To answer a call at the extension receiving held call ∙ You can scan your held calls and retrieve a specific oneUsing Call Park ∙ To park a call∙ To retrieve a parked call This page remains blank intentionally Using the Messaging Feature Sending And ReceivingNon-Verbal Messages Using LCD Messaging ∙ To turn on LCD messaging Press IntercomSending An LCD Message This page remains blank intentionally ∙ If you hear a busy signal or receive no answer Transferring Outside Calls∙ To announce a call before transferring it ∙ To transfer a call without first announcing it∙ To make a hot transfer Press TRANSFER/CONFERENCE∙ To do a quick screened transfer to intercom or tie line ∙ To do a quick unscreened transfer to intercom or tie lineConferencing Calls Conferencing Stations TogetherPress the line button of the remaining party Programming Your Telephone Storing DSS Numbers∙ To store extension numbers at DSS buttons Storing Feature Buttons ∙ To store special-purpose feature buttonsStoring a Response Message Button ∙ To store a fixed Response Message button Press IntercomProgramming Speed Dial Numbers ∙ To store an outside number as a speed dial numberDial Press the button you want to program Setting a Reminder Alert ∙ To set a reminder alert at your telephone∙ To respond to an alert after it sounds This page remains blank intentionally Using The Other Telephone FeaturesAdjusting The Display Contrast Blocking Voice-Announce Calls∙ To identify the station that occupies a busy line ∙ To identify the line that a busy station occupies∙ To cancel group listening ∙ To divert calls to the designated station∙ To activate group listening while on a call Setting a Do Not Disturb Condition Muting Your Telephone∙ To override an in-progress call at another telephone ∙ To override a Do Not Disturb condition at another stationSetting The Volume Control GCA70-258 Using The Other Telephone Features Using The Other Telephone Features GCA70-258 Setting Your Personal Ringing Tones Using Background Music∙ To select one of the ringing tones ∙ To turn the music onUsing The Imist Module Using The Caller ID Feature ∙ To determine who viewed the number and returned the callThis page remains blank intentionally Operating Your Telephone With a DSS/BLF Console Operating Your Telephone With a DSS/BLF ConsoleAccessing The Button Levels Symptom Possible Cause Your TelephoneThis page remains blank intentionally Index Section Index GCA70-258 GCA70-258 Index This page remains blank intentionally Feature Enable Code Disable Code Appendix aButton Feature Enable Code Disable Code Button Mnemonic Intercom LNG01 Intercom # OBS Feature Enable Code Page 7266, Charlottesville, Virginia Charlottesville, Virginia