Polk Audio 6000 manual HOW to Connect Your BAR HOW to Connect Your Subwoofer, To inserting cable

HOW TO CONNECT YOUR BAR HOW TO CONNECT YOUR SUBWOOFER

This is really easy too. You likely have many sources for your audio signal: your TV, your DVD player, or a cable/satellite box. The bar is able to accept audio from up to three different sources. The simplest approach is to connect the optical audio output of your TV to the optical input on the back of the bar. This method will provide the highest quality audio regardless of whether you are watching TV or watching your favorite DVD.

If your TV does not have an optical output, you can use the optical output from your DVD player or your cable/satellite box to connect to the optical input on the bar. Then simply use the other bar inputs for your other audio sources.

Your subwoofer receives a wireless audio signal from the bar, so all you need to do is plug in the power cord and make sure the main power switch is ON.

TV or Cable/Sat Box

SurroundBar 6000

POWER	24V
	2.5A
	OFF
	ON
	60W

SOURCE

SYNC

OPTICAL AUDIO

OUTPUT

1 2 3

Note: If necessary remove the protective cap prior

to inserting cable.

CONNECTING THE BAR AND WIRELESS SUBWOOFER

The SurroundBar 6000 bar and wireless subwoofer come from the factory preset to work together. If the wireless subwoofer stops receiving an audio signal, follow these instructions to re-establish the connection.

1.Turn off the subwoofer’s AC Mains switch.

2.Press and hold the SYNC button on the back of the bar for three (3) seconds.

3.The LED on the back of the bar will blink, indicating that the bar and the subwoofer are ready to be connected.

4.Turn on the subwoofer’s AC Mains switch. When the subwoofer LED turns solid green the bar and subwoofer are connected and ready to use.

Customer Service Hours of Operation: Monday-Friday, 9AM-5:30PM EST polkcs@polkaudio.com 7