Oricom M5500 Series manual Menu Setup, Audio settings, Audio TAD setting Pabx setting Setting

MENU SETUP

Menu Setup

During standby mode, on the base unit.

1. Press OK key to enter menu set mode.

2. Press ! or	key to select the item that you wish to set. The display is
shown in this order: Key Lock		Audio	TAD setting	PABX setting
Setting.

3. Press OK key to enter the item that you wish to set or press key to exit menu set mode.

Key lock

Before setting key lock, you have to input a 4-digit PIN code first. The default setting is 0000.

1. Enter 0000.

2. Press OK key, the display on the right is shown.

3. Press ! or	key to select “Off” or “On”
from the display.

4. Press OK key to confirm and return to the previous mode.

5. Press key to return to the main menu.

Note: All the previously stored settings are shown after opening the submenu.

Audio settings

During standby mode,
1. Press	OK key to enter the menu set mode.
2. Press	! or	key to select the item
“Audio” from the display.
3. Press	OK key to enter Audio setting. The
display on the right is shown.
4. Press	! or	key to select the item that you wish to set. The display is
shown in this order: Ring Tone			Ring Loudness	Key Tone	dashes to
show that you have reached the end of the menu.

5. Press OK key to enter the item that you wish to set.

6. Press key to return to the previous menu.

28