Oricom M5500 Series Pabx settings, Prefix Number Dashes to show, Key locks PIN, Prefix setting

MENU SETUP

PABX settings

1. Enter “PABX setting” mode (Refer to the operation in “Audio setting” section on P28).

2. Press ! or	key to select the item that you wish to set. The display is
shown in this order: Key PIN		Prefix Number	Prefix	dashes to show
that you have reached the end of the menu.

3. Press OK key to enter the item that you wish to set.

Key lock's PIN

During PABX setting mode,

1.	Press	! or	key to select “Key PIN” on the display.
2.	Press	OK key to enter the mode. The display

on the right is shown.

3. Enter 0000 (default value).

4. Press OK key.

5. Press the numeric keys to enter a new number or press ! / key to select the desired digit’s position.

6. Press OK key to confirm and return to the previous mode.

Prefix number setting

During PABX setting mode,

1. Press ! or key to select “Prefix Number” from the display.

2. Press OK key to enter the mode. The display on the right is shown.

3. Press the numeric keys to enter a new number (up to 6 digits) or press ! / key to select the desired digit’s position.

4. Press OK key to confirm and return to the previous mode.

Prefix setting

During PABX setting mode,

1. Press ! or key to select “Prefix” from the display.

2. Press OK key to enter the mode. “Prefix-Off” appears on the display.

3. Press ! or key to switch between “Prefix-Off/On” mode.

4. Press OK key to confirm the selection and return to the previous mode.

31