Oricom M5500 Series manual Cordless handset keypad lock, Registration

CORDLESS HANDSET OPERATION

Cordless handset keypad lock

During standby mode,
1. Press and hold # key to lock the keypad.	HANDSET	1
2. To release keypad lock, press and hold #	key
for 3 seconds.

Note: When the keypad is lock, key and INT key can be used to answer an external or intercom call.

Registration

Register new handsets on the M5500 base

Before you can use new handsets. You need to 1. Charge the batteries (for 15 hours).

2. Register the handset (to the base unit).

Each handset can register to four base at a time. Each base can register up to 4 handsets.

During standby mode,
1. Press	key.		REGISTER
2. Press
	or	key to select “REGISTER”
from the display.
3. Press	key. The display on the right is shown.		BS ?
4. Press the numeric keys to enter the base number.
5. Press	key to confirm.
6. Press and hold		key. The base is now in the registration mode.
7. Press the numeric keys to enter the default PIN (0000).
8. Press	key to confirm and return to standby mode.

Note: If the base is full and cannot add any more handsets, you will hear a tone. See the next section to remove a handset.

36