MESSAGE INDICATORS
The following indicators show the status of a message or of the unit.
CALLER ID ERROR | Caller information has been interrupted during |
| transmission or the phone is excessively noisy. |
ENTER NAME | Prompt telling you to enter name one of the 10 |
| memory locations. |
ERASE ALL? | Prompt asking you if you want to erase all Caller |
| ID records. |
ERASE CALL ID? | Prompt asking you if you want to erase the |
| current Caller ID record that is shown on the display. |
ERASE MEMO? | Prompt asking you if you want to erase one of the 10 |
| numbers stored in the phone's outgoing memory. |
END OF LIST | Indicates that there is no additional information in |
| Caller ID memory. |
NEW | Indicates call or calls have not been reviewed. |
OUT OF AREA | The incoming call is from an area not serviced by |
| Caller ID or the information was not sent |
PAGING YOU | Someone has pressed the PAGE button on the base. |
PRIVATE | The person is calling from a number that has been |
| blocked from transmission. |
REPT | Repeat call message. Indicates that a new call from the |
| same number was received more than once. |
HANDSET SOUND SIGNALS
Signal | Meaning |
A long warbling tone (with ringer on) | Signals an incoming call |
One short beep, one long beep (3 times) | Page signal |
Three short beeps | Out of range |
Four short beeps | Low battery warning |
|
|
24