WALL MOUNT INSTALLATION
Because it is necessary to charge the handset for 12 hours prior to connecting the phone for use the first time, it is better to leave the unit on a flat surface during initial charge before attempting to hang it on the wall.
1.Place the handset in the base.
2.Connect the power supply adapter into the base and then an AC outlet.
Allow the phone to charge for 12 hours before using the first time. If you don't charge the phone properly (for 12 hours) when you first set up the phone, perfomance of the battery will be compromised.
The CHARGE/IN USE light comes on indicating that the battery is charging.
3.Set the RINGER switch on the handset to ON.
4.After charging, plug the short phone line cord into the phone jack on the back of the unit and then to the wall jack.
5.Attach the wall mount bracket by inserting the two tabs at the top and then snapping the tab at the bottom into place.
1
3
2
4
5
CAUTION: Use only the Thomson
7