RCA 26730 manual Desktop Installation

DESKTOP INSTALLATION	NOTE: For
	desktop charging
1	only, the handset
	is able to charge
3	facing up or

down.

2

4

5

1.Place the handset in the base.

2.Set the RINGER switch on the handset to ON.

3.Raise the base antenna.

4.Plug the power supply cord into the base and then into an AC outlet. The CHARGE/IN USE light comes on indicating that the battery is charging.

Allow the phone to charge for 12 hours before using the first time. If you don't charge the phone properly (for 12 hours) when you first set up the phone, perfomance of the battery will be compromised.

5.After charging, connect the telephone cord to the phone and then to the wall jack.

NOTE : The phone automatically defaults to touch-tone dialing. To change to pulse (rotary) dialing, see “Tone/Pulse Dialing. If you don’t know which type of service you have, check with the phone company.

CAUTION: Use only the Thomson 5-2455 (black)/ 5-2454 (white) power supply that came with this unit. Using other adapters may damage the unit.

6