Answering an Incoming Call
1.When the FLX2 System identifies an incoming call, it will play the ring tone through the FLX Speaker. If the Dialer is not in the Charger Base it will play a ring tone, too.
2.The FLX Dialer will display the caller ID information for the incoming call. The yellow phone symbol represents an incoming call, in this case on line one.
3.A call can be answered in one of three fashions.
a.Press the Green ‘Call’ button or the ‘Answer’ key on the FLX Dialer.
b.Remove a Microphone from the charger.
c.Press the mute/unmute button on a Microphone that is already out of the charger.
NOTE: If there is either no Speaker active or no Microphones outside the Charger Base when the incoming call is answered from the FLX Dialer, the call will default to ‘handset mode’ and will remain in ‘handset mode’. The call can only be switched to ‘speaker mode’ if the speaker and at least one microphone is switched on. If all microphones are in the charger base at least one has to be switched on before by pressing the microphone button.
Declining an Incoming VoIP Call
1.When the FLX2 System identifies an incoming call, it will play the ring tone through the FLX Speaker.
2.The FLX Dialer will display the caller ID information for the incoming call.
3.A call can be ignored in one of two fashions.
a.Press the Red ‘End Call’ button on the FLX Dialer.
b.Press the ‘Decline’ key on the FLX Dialer.
Note: Once the user ignores the call, the telephone switch decides how to handle the call. It might for example be transferred into voicemail, based on settings in the telephone switch.
21