Revolabs 10-FLX2-200-VOIP 10-FLX2-020-VOIP 10-FLX2-002-VOIP 10-FLX2-101-VOIP Speaker, Microphone

Page 47

Speaker

1.To pair a Speaker first turn it off by pressing and holding the button on the bottom of the Speaker until you hear the Speaker shut-off or the LEDs turn off.

2.Ensure that the Base Station is plugged in and powered up.

3.On the Dialer, browse to the Pairing menu: Menu  Setup  Advanced Setup  Pairing.

4.Select SPK 1 (Speaker 1) and press the ‘Enter’ or ‘Pair’ key to enter pairing state.

5.The screen will display ‘Pairing Speaker 1’.

6.Press and hold the button on the bottom of the Speaker until the LED turns solid red. The speaker is now in pairing mode.

7.After a short time an overlay will appear on the FLX Dialer saying ‘Pairing Successful’, after which the screen should read ‘SPK 1 Linked’.

8.If pairing was unsuccessful, the Speaker will show an alternating red -green slow blinking sequence indicating that the pairing failed. The Dialer will display a ‘Pairing Timeout’ message. In that case the pairing procedure should be repeated.

Microphone

1.To pair a Microphone, turn off the Microphone by holding the mute button until the LED turns red if it is not already turned off.

2.Ensure that the Base Station is plugged in and powered up.

3.On the Dialer, browse to the Pairing menu: Menu  Setup

 Advanced Setup  Pairing.

4.Select MIC 1 (Microphone 1) or MIC 2 (Microphone 2) and press the ‘Enter’ key to enter pairing state.

5.The screen will display ‘Pairing Mic 1’ or ‘Pairing Mic 2’ depending on which Microphone you are pairing.

6.Press the mute button on the Microphone and hold it until the LED turns solid red. The Microphone is now in pairing mode.

7.After a short time an overlay will appear on the Dialer ‘Pairing Successful’, after that the screen should read ‘MIC 1

Linked’ or ‘MIC 2 Linked’, based on which one you were pairing.

9.If pairing was unsuccessful, the Microphone will show an alternating red - green slow blink sequence, indicating that the pairing failed. The Dialer will display a ‘Pairing Timeout’ message. In that case the pairing procedure should be repeated.

47

Image 47

Contents Models Revolabs FLX2TMPage Introduction Safety WarningsContents GPL Licensed Software GNU General Public License General Information Connecting the Charger Base Quick setup for VoIP Conference CallsConnecting the Base Station Making a call VoIP configurationUnpacking DescriptionFLX2 Base Station Installing FLX2 ComponentsFLX2 Charger Base FLX Dialer FLX Speaker FLX Microphones From the FLX Handset Initial SetupVoIP configuration Connecting System CablesFrom the FLX Web Interface Calling ConfigurationsSpeaker Mode Managing a CallVideo Conference Call Handset ModeBluetooth Call VoIP CallFLX Home Screen Page Placing a VoIP Call Declining an Incoming VoIP Call Answering an Incoming CallCaller ID Ending a Telephone callCalling a Directory Contact Active Call ManagementPlacing a Call on Hold Muting a CallActive Call Menu Call Waiting Conference CallMicrophones Component behavior in and out of the Charger BaseDialer SpeakerDevice List BluetoothActivating Bluetooth Managing the Device RegistryAdding a Device Accepting Device Connection Request Viewing Device DetailsRemoving a Device Setting Device Trust Level Making a call via BluetoothAnswering a call via Bluetooth Making a Video Call Connecting a Video Conference SystemConfiguring the Analog Audio Video Conference CollaborationMixing the audio signals Menu Navigation FLX2 System ConfigurationMenu Hierarchy Call Recent Caller Recent CallsRecent Call Log Delete Recent Call Entry View Recent Call InformationSave Recent Caller as Contact Add a Contact ContactsDelete Call History View Contact ListDelete a Contact Edit a ContactCall Contact Search for ContactView Contact Information Calling a Speed Dial Number Speaker VolumeAudio Control Set Speed DialMute / UnMute RingerEqualizer EQ Audio MixerSystem Info Device StatusSystem Information Call BluetoothSetup HomeDate/Time Bluetooth, AudioMic Audio Advanced SetupAux Audio Admin Settings Web Access on / OFF Microphone Speaker Indicator Status LED Pairing IndicatorsWeb Interface Enabling Web AccessConnecting to the FLX Web Interface Home Audio User SettingsCall Forwarding Settings below can be changed at any time during a callDate/Time Logging Out of the Web Session Administrator SettingsRestarting the Phone Network Settings SIP Registration Static IP SettingsSIP Registration SIP Settings Period to be used for the session Transport NAT Settings Transport SettingsQoS ICEMedia Settings Recommend enabling this feature only for test purposes Call SettingsAdvanced Audio Settings Access Control RF SettingSIP ID Importing and Exporting Configuration SettingsDownloading the System Log Package Call Status Microphones On/Off Power On/Off the System ComponentsDialer On/Off Speaker On/OffDialer Battery ExchangeMicrophones Speaker Connecting using AUX in / AUX OUTPCS-HG90 Troubleshooting Microphone, Speaker, or Dialer not paired with Base Station LED IndicatorsDevice LED Indicator Status Speaker not in Charger Base Reset to Factory Defaults Technical SpecificationsCharger Base Industry Canada Notice to Users Regulatory InformationFCC Notice to Users European Union Usage Restriction Restricted use with certain medical devicesExport Law Assurance North American Upcs Usage RestrictionModel Model Numbers Declaration of ConformityLimited Warranty Limited Warranty and Limitation of LiabilityDisclaimer Preamble GPL Licensed SoftwarePage Page Page No Warranty Technical Support