Revolabs 10-FLX2-200-VOIP 10-FLX2-020-VOIP 10-FLX2-002-VOIP 10-FLX2-101-VOIP SIP Registration

Page 57

The table below describes the SIP Registration settings. Different IP PBX providers might use different names in their setup. The descriptions below will help you in mapping the FLX fields to your IP PBX fields.

SIP Registration

Registrar	This is the IP address or DNS name of the SIP registrar server.
Use Proxy for	Use this option to indicate whether or not the SIP proxy server(s)
Registration	specified in the Outbound Proxy field should be used when
	registering. Select “Use Outbound Proxy” to have the system add
	listed proxy servers to the route headers of the SIP REGISTER
	request.
Outbound Proxy	Enter the outbound SIP proxy server’s IP address or name in the
	Outbound Proxy field. If there are multiple SIP proxies, separate the
	addresses by a comma. Also note that on the SIP Settings page
	there’s an option to allow strict routing. If that option is set and you
	have a SIP proxy that is configured for loose routing, add the “;lr”
	designation after the proxy’s address, for example,
	“10.134.129.101;lr”.
ID	ID is the phone’s SIP ID used for SIP registration. If this field is left
	blank, the Username field will be used as the ID.
Display Name	Display Name is the string that is shown at the far side when you
	make outbound calls. If you do not provide a Display Name, the
	Username will be used. Please note that your IP PBX might
	override the Display name sent by the FLX and replace it with
	names configured in the PBX.
Username	This is the username for the account used to authentication with the
	SIP registrar and proxies.
Password	This is the password for the account used to authenticate with the
	SIP registrar and proxies.
Registration	Registration Timeout is the optional timeout for SIP account
Timeout	registration, in seconds. The default is 55. If set to 0, the default will
	be used.
Auto Re-	If SIP registration is unsuccessful, this field specified the time
registration Retry	duration between retry attempts, in seconds. The default is 300
Interval	seconds (5 minutes).

57

Image 57

Contents Models Revolabs FLX2TMPage Introduction Safety WarningsContents GPL Licensed Software GNU General Public License General Information Quick setup for VoIP Conference Calls Connecting the Base StationConnecting the Charger Base Making a call VoIP configurationUnpacking DescriptionFLX2 Base Station Installing FLX2 ComponentsFLX2 Charger Base FLX Dialer FLX Speaker FLX Microphones VoIP configuration Initial SetupConnecting System Cables From the FLX HandsetSpeaker Mode Calling ConfigurationsManaging a Call From the FLX Web InterfaceBluetooth Call Handset ModeVoIP Call Video Conference CallFLX Home Screen Page Placing a VoIP Call Declining an Incoming VoIP Call Answering an Incoming CallCalling a Directory Contact Ending a Telephone callActive Call Management Caller IDMuting a Call Active Call MenuPlacing a Call on Hold Call Waiting Conference CallDialer Component behavior in and out of the Charger BaseSpeaker MicrophonesActivating Bluetooth BluetoothManaging the Device Registry Device ListAdding a Device Viewing Device Details Removing a DeviceAccepting Device Connection Request Making a call via Bluetooth Answering a call via BluetoothSetting Device Trust Level Configuring the Analog Audio Connecting a Video Conference SystemVideo Conference Collaboration Making a Video CallMixing the audio signals FLX2 System Configuration Menu HierarchyMenu Navigation Recent Calls Recent Call LogCall Recent Caller View Recent Call Information Save Recent Caller as ContactDelete Recent Call Entry Delete Call History ContactsView Contact List Add a ContactDelete a Contact Edit a ContactSearch for Contact View Contact InformationCall Contact Audio Control Speaker VolumeSet Speed Dial Calling a Speed Dial NumberEqualizer EQ RingerAudio Mixer Mute / UnMuteDevice Status System InformationSystem Info Setup BluetoothHome CallDate/Time Bluetooth, AudioMic Audio Advanced SetupAux Audio Admin Settings Web Access on / OFF Microphone Speaker Indicator Status LED Pairing IndicatorsEnabling Web Access Connecting to the FLX Web InterfaceWeb Interface Home Audio User SettingsCall Forwarding Settings below can be changed at any time during a callDate/Time Administrator Settings Restarting the PhoneLogging Out of the Web Session Network Settings SIP Registration Static IP SettingsSIP Registration SIP Settings Period to be used for the session Transport NAT Settings Transport SettingsQoS ICEMedia Settings Recommend enabling this feature only for test purposes Call SettingsAdvanced Audio Settings Access Control RF SettingSIP ID Importing and Exporting Configuration SettingsDownloading the System Log Package Call Status Dialer On/Off Power On/Off the System ComponentsSpeaker On/Off Microphones On/OffBattery Exchange MicrophonesDialer Speaker Connecting using AUX in / AUX OUTPCS-HG90 Troubleshooting Microphone, Speaker, or Dialer not paired with Base Station LED IndicatorsDevice LED Indicator Status Speaker not in Charger Base Reset to Factory Defaults Technical SpecificationsCharger Base Regulatory Information FCC Notice to UsersIndustry Canada Notice to Users Export Law Assurance Restricted use with certain medical devicesNorth American Upcs Usage Restriction European Union Usage RestrictionModel Model Numbers Declaration of ConformityLimited Warranty Limited Warranty and Limitation of LiabilityDisclaimer Preamble GPL Licensed SoftwarePage Page Page No Warranty Technical Support