Revolabs 10-FLX2-200-VOIP 10-FLX2-020-VOIP 10-FLX2-002-VOIP 10-FLX2-101-VOIP manual

Device LED Indicator	Status
Alternating slow Red - Green flash	Speaker is not paired to a Base Station
	Speaker is powered off:
Off	o Speaker is not seated properly
	o Charger tray is powered off
Speaker not in Charger Base
Off	Speaker is powered off
	o Connected, no call in progress, Microphones in
	Charger Base
	o Connected, no phone call in progress,
Green flash every second	Microphone(s) outside of the Charger Base
	unmuted
	o Connected, call in progress, Microphones are not
	muted using All Mic Mute or Master Mute
	o Microphone(s) might still be individually muted
	o Connected, phone call in progress, Master Mute
	or “All Mic Mute” is ON, all microphones are
Red flash every second	muted
	o Connected, no phone call in progress,
	Microphone(s) outside of Charger Base, “All Mic
	Mute” is ON, all Microphones are muted
	o Connected, battery low, no call in progress
Alternating Green – Yellow* flash	o Connected, battery low, call in progress,
	Microphones are not muted using All Mic Mute or
	Master Mute. Microphone(s) might still be
	individually muted
	o Connected, battery low, no call in progress, “All
	Mic Mute” is ON, all Microphones are muted
Alternating long Red – Yellow* flash	o Connected, battery low, call in progress, Master
	Mute or “All Mic Mute” is ON, all Microphones
	muted
Flashing Yellow* – Red – Yellow* –	Searching for a connection to the base
	The speaker will try to re-establish the link
Green
	for about 10 minutes, then power off.
Alternating slow Red - Green flash	Speaker is not paired to a Base Station
	The speaker will power down after two minutes.
Steady Red	o Speaker is being powered down
	o Speaker is in pairing mode.
Groups of five rapid Red flashes	Speaker is in a fault condition.
Device LED Indicator	Status
	Base Station
Long solid on, then a long solid off	Power On Boot Process
Double flashes every second	Operating Mode indicating that Base Station is
	functional.
Skip every fifth double flash	Fault indication. This also indicates past faults that
	have no bearings on current operation
Continuous Fast Flashing	Updating non-volatile memory as part of software
	update
Off	No Power

* In some Speakers the LED Indicator color Yellow might look like Red.

77