Revolabs 10-FLX2-200-VOIP 10-FLX2-020-VOIP 10-FLX2-002-VOIP 10-FLX2-101-VOIP Dialer, Speaker

Page 25

Component behavior in and out of the Charger Base

Each system component will respond differently when placed in or out of the charger during an active telephone call. The following is a description of what can be expected.

Dialer

When the Dialer is placed into the Charger Base during a call in ‘speaker mode’, the call will not be affected and the Dialer will enter its charging mode.

When the Dialer is placed into the Charger Base during a ‘handset mode’ call, all calls (even calls that are currently on hold) will end and the Dialer will enter its charging mode.

When the Dialer is removed from the Charger Base no change to call activity will take place. If there is no active call, the Dialer will revert to the home screen.

Speaker

When the Speaker is placed into the charger during a call the Speaker will reboot and enter its charging mode. During the reboot the incoming audio from the conference call will mute until the reboot is complete (approximately 6 seconds). Once the reboot is complete the audio will resume on the speaker.

When the Speaker is removed from the charger no change to call activity will take place.

Microphones

When a Microphone is placed into the charger during a call it will automatically reboot, switch off and enter its charging mode. If all Microphones are placed into the charger during a speaker call, all Microphones will switch off and the call will automatically switch to handset mode. To return to a speaker call a Microphone in the charger base will need to be manually switched on by pressing the mute button, and then unmuted by pressing the button again. The call will need to be switched over to a speaker call using the dialer. It is not recommended to use the Microphones in the Charger Base for a speaker call.

If at least one Microphone is outside the charger base active, the Microphone in the Charger Base cannot be unmuted.

When a Microphone is removed from the charger, it will automatically power on and if “Start Unmute” is ON, unmute itself. If there is an incoming call when a Microphone is removed from the charger the call will automatically be answered.

25

Image 25
Contents Models Revolabs FLX2TMPage Introduction Safety WarningsContents GPL Licensed Software GNU General Public License General Information Connecting the Base Station Quick setup for VoIP Conference CallsConnecting the Charger Base Making a call VoIP configurationUnpacking DescriptionFLX2 Base Station Installing FLX2 ComponentsFLX2 Charger Base FLX Dialer FLX Speaker FLX Microphones VoIP configuration Initial SetupConnecting System Cables From the FLX HandsetSpeaker Mode Calling ConfigurationsManaging a Call From the FLX Web InterfaceBluetooth Call Handset ModeVoIP Call Video Conference CallFLX Home Screen Page Placing a VoIP Call Declining an Incoming VoIP Call Answering an Incoming CallCalling a Directory Contact Ending a Telephone callActive Call Management Caller IDActive Call Menu Muting a CallPlacing a Call on Hold Call Waiting Conference CallDialer Component behavior in and out of the Charger BaseSpeaker MicrophonesActivating Bluetooth BluetoothManaging the Device Registry Device ListAdding a Device Removing a Device Viewing Device DetailsAccepting Device Connection Request Answering a call via Bluetooth Making a call via BluetoothSetting Device Trust Level Configuring the Analog Audio Connecting a Video Conference SystemVideo Conference Collaboration Making a Video CallMixing the audio signals Menu Hierarchy FLX2 System ConfigurationMenu Navigation Recent Call Log Recent CallsCall Recent Caller Save Recent Caller as Contact View Recent Call InformationDelete Recent Call Entry Delete Call History ContactsView Contact List Add a ContactDelete a Contact Edit a ContactView Contact Information Search for ContactCall Contact Audio Control Speaker VolumeSet Speed Dial Calling a Speed Dial NumberEqualizer EQ RingerAudio Mixer Mute / UnMuteSystem Information Device StatusSystem Info Setup BluetoothHome CallDate/Time Bluetooth, AudioMic Audio Advanced SetupAux Audio Admin Settings Web Access on / OFF Microphone Speaker Indicator Status LED Pairing IndicatorsConnecting to the FLX Web Interface Enabling Web AccessWeb Interface Home Audio User SettingsCall Forwarding Settings below can be changed at any time during a callDate/Time Restarting the Phone Administrator SettingsLogging Out of the Web Session Network Settings SIP Registration Static IP SettingsSIP Registration SIP Settings Period to be used for the session Transport NAT Settings Transport SettingsQoS ICEMedia Settings Recommend enabling this feature only for test purposes Call SettingsAdvanced Audio Settings Access Control RF SettingSIP ID Importing and Exporting Configuration SettingsDownloading the System Log Package Call Status Dialer On/Off Power On/Off the System ComponentsSpeaker On/Off Microphones On/OffMicrophones Battery ExchangeDialer Speaker Connecting using AUX in / AUX OUTPCS-HG90 Troubleshooting Microphone, Speaker, or Dialer not paired with Base Station LED IndicatorsDevice LED Indicator Status Speaker not in Charger Base Reset to Factory Defaults Technical SpecificationsCharger Base FCC Notice to Users Regulatory InformationIndustry Canada Notice to Users Export Law Assurance Restricted use with certain medical devicesNorth American Upcs Usage Restriction European Union Usage RestrictionModel Model Numbers Declaration of ConformityLimited Warranty Limited Warranty and Limitation of LiabilityDisclaimer Preamble GPL Licensed SoftwarePage Page Page No Warranty Technical Support