Revolabs 10-FLX2-200-VOIP 10-FLX2-020-VOIP 10-FLX2-002-VOIP 10-FLX2-101-VOIP manual LED Indicators

Page 75

the Base Station. All components should automatically connect to the Base Station after a few seconds.

2.The Base Station is powered up, but the Status LED indicates a fault has happened by missing every fifth green double flash. Power down and power up the Base Station. All components should reconnect to the Base Station after a few seconds. The fault message in the Base Station will continue (every fifth double flash is skipped) – this just shows that a fault has happened in the past and can be ignored. If the components still do not connect to the base please contact Revolabs Support.

3.Are the Dialer, Microphone, and Speaker out of reach of the Base Station? Please bring the components closer to the Base Station to see whether this resolves the issue.

4.Power down the Base Station, the Microphones, the Dialer, and the Speaker. Now power up the Base Station. Once the Base Station is powered up (double green flashes of the Status LED), power up the Dialer, and then the Microphones and the Speaker. The components should now connect to the Base Station.

5.If the components still do not connect to the Base Station, please re-pair the components that have not connected to the Base Station, beginning with the Dialer. Pair of components to the Base Station is explained on page 42.

6.If the components still do not connect to the Base Station, please contact Revolabs support.

Microphone, Speaker, or Dialer not paired with Base Station

Please follow the descriptions on page 42 on how to pair the different components with the Base Station.

LED Indicators

	Device LED Indicator	Status

	Microphone in Charger Base

	Steady Red	Charging

	Steady Green	Fully charged

		Active phone call, both microphones in Charger
	Single red flash	Base, microphones muted via Master Mute or All
		Mic Mute is ON
	Double red flash	Active phone call, microphone(s) in Charger Base,
	Double red flash	microphone is muted
		microphone is muted
	Green flash	Active phone call, microphone in Charger Base is
	Green flash	unmuted
		unmuted
		Microphone is powered off:
	Off	o Microphone is not seated properly
		o Charger Base is powered off
	Microphone	not in Charger Base

	Off	Microphone is powered off

	Single green flash every second	On, connected, battery charged, un-muted

75

Image 75

Contents Models Revolabs FLX2TMPage Introduction Safety WarningsContents GPL Licensed Software GNU General Public License General Information Quick setup for VoIP Conference Calls Connecting the Base StationConnecting the Charger Base Making a call VoIP configurationUnpacking DescriptionFLX2 Base Station Installing FLX2 ComponentsFLX2 Charger Base FLX Dialer FLX Speaker FLX Microphones From the FLX Handset Initial SetupVoIP configuration Connecting System CablesFrom the FLX Web Interface Calling ConfigurationsSpeaker Mode Managing a CallVideo Conference Call Handset ModeBluetooth Call VoIP CallFLX Home Screen Page Placing a VoIP Call Declining an Incoming VoIP Call Answering an Incoming CallCaller ID Ending a Telephone callCalling a Directory Contact Active Call ManagementMuting a Call Active Call MenuPlacing a Call on Hold Call Waiting Conference CallMicrophones Component behavior in and out of the Charger BaseDialer SpeakerDevice List BluetoothActivating Bluetooth Managing the Device RegistryAdding a Device Viewing Device Details Removing a DeviceAccepting Device Connection Request Making a call via Bluetooth Answering a call via BluetoothSetting Device Trust Level Making a Video Call Connecting a Video Conference SystemConfiguring the Analog Audio Video Conference CollaborationMixing the audio signals FLX2 System Configuration Menu HierarchyMenu Navigation Recent Calls Recent Call LogCall Recent Caller View Recent Call Information Save Recent Caller as ContactDelete Recent Call Entry Add a Contact ContactsDelete Call History View Contact ListDelete a Contact Edit a ContactSearch for Contact View Contact InformationCall Contact Calling a Speed Dial Number Speaker VolumeAudio Control Set Speed DialMute / UnMute RingerEqualizer EQ Audio MixerDevice Status System InformationSystem Info Call BluetoothSetup HomeDate/Time Bluetooth, AudioMic Audio Advanced SetupAux Audio Admin Settings Web Access on / OFF Microphone Speaker Indicator Status LED Pairing IndicatorsEnabling Web Access Connecting to the FLX Web InterfaceWeb Interface Home Audio User SettingsCall Forwarding Settings below can be changed at any time during a callDate/Time Administrator Settings Restarting the PhoneLogging Out of the Web Session Network Settings SIP Registration Static IP SettingsSIP Registration SIP Settings Period to be used for the session Transport NAT Settings Transport SettingsQoS ICEMedia Settings Recommend enabling this feature only for test purposes Call SettingsAdvanced Audio Settings Access Control RF SettingSIP ID Importing and Exporting Configuration SettingsDownloading the System Log Package Call Status Microphones On/Off Power On/Off the System ComponentsDialer On/Off Speaker On/OffBattery Exchange MicrophonesDialer Speaker Connecting using AUX in / AUX OUTPCS-HG90 Troubleshooting Microphone, Speaker, or Dialer not paired with Base Station LED IndicatorsDevice LED Indicator Status Speaker not in Charger Base Reset to Factory Defaults Technical SpecificationsCharger Base Regulatory Information FCC Notice to UsersIndustry Canada Notice to Users European Union Usage Restriction Restricted use with certain medical devicesExport Law Assurance North American Upcs Usage RestrictionModel Model Numbers Declaration of ConformityLimited Warranty Limited Warranty and Limitation of LiabilityDisclaimer Preamble GPL Licensed SoftwarePage Page Page No Warranty Technical Support