Revolabs 10-FLX2-200-VOIP 10-FLX2-020-VOIP 10-FLX2-002-VOIP 10-FLX2-101-VOIP manual Sip Id

Page 67

Access Control

Password	The password is used to control access to the web interface and the
	advanced Administrator settings on the FLX Handset. The password
	must be four digits. The default password is 7386. This password
	should be changed by the system administrator. Please ensure that
	you take note of the changed password.
Recent Call	Use the Recent Call Enabled option to enable or disable the Recent
Enabled	Calls list on the FLX Handset. The default setting is On.
Web Access	Use the Web Access Enabled option to enable or disable the FLX
Enabled	web interface. If access is enabled, users can browse to the FLX
	using a web browser. Even if enabled, the web interface is
	password protected for all pages. It is restricted to Administrator
	use. If disabled, any web-access is rejected. Once web access is
	disabled, it can only be enabled again by an administrator from the
	handset. The default setting is On

Importing and Exporting Configuration Settings

Through the web interface you can import and export FLX configuration settings. These features are particularly useful if you are installing several FLX phones and want them all to use the same base set of configuration values.

A common procedure would be to configure one FLX phone as desired, ensure that it is working properly in your environment, and then export the configuration settings for that phone. Then, you would use that configuration file as a starting point for the other phones, importing that file into each of the other phones.

The export process creates a single XML file that includes all the core settings, excluding the following:

•Static IP Address

•SIP ID

•Display Name

•Username

•Password

Below is an illustration of the Import/Export page.

67

Image 67

Contents Models Revolabs FLX2TMPage Introduction Safety WarningsContents GPL Licensed Software GNU General Public License General Information Connecting the Base Station Quick setup for VoIP Conference CallsConnecting the Charger Base Making a call VoIP configurationUnpacking DescriptionFLX2 Base Station Installing FLX2 ComponentsFLX2 Charger Base FLX Dialer FLX Speaker FLX Microphones From the FLX Handset Initial SetupVoIP configuration Connecting System CablesFrom the FLX Web Interface Calling ConfigurationsSpeaker Mode Managing a CallVideo Conference Call Handset ModeBluetooth Call VoIP CallFLX Home Screen Page Placing a VoIP Call Declining an Incoming VoIP Call Answering an Incoming CallCaller ID Ending a Telephone callCalling a Directory Contact Active Call ManagementActive Call Menu Muting a CallPlacing a Call on Hold Call Waiting Conference CallMicrophones Component behavior in and out of the Charger BaseDialer SpeakerDevice List BluetoothActivating Bluetooth Managing the Device RegistryAdding a Device Removing a Device Viewing Device DetailsAccepting Device Connection Request Answering a call via Bluetooth Making a call via BluetoothSetting Device Trust Level Making a Video Call Connecting a Video Conference SystemConfiguring the Analog Audio Video Conference CollaborationMixing the audio signals Menu Hierarchy FLX2 System ConfigurationMenu Navigation Recent Call Log Recent CallsCall Recent Caller Save Recent Caller as Contact View Recent Call InformationDelete Recent Call Entry Add a Contact ContactsDelete Call History View Contact ListDelete a Contact Edit a ContactView Contact Information Search for ContactCall Contact Calling a Speed Dial Number Speaker VolumeAudio Control Set Speed DialMute / UnMute RingerEqualizer EQ Audio MixerSystem Information Device StatusSystem Info Call BluetoothSetup HomeDate/Time Bluetooth, AudioMic Audio Advanced SetupAux Audio Admin Settings Web Access on / OFF Microphone Speaker Indicator Status LED Pairing IndicatorsConnecting to the FLX Web Interface Enabling Web AccessWeb Interface Home Audio User SettingsCall Forwarding Settings below can be changed at any time during a callDate/Time Restarting the Phone Administrator SettingsLogging Out of the Web Session Network Settings SIP Registration Static IP SettingsSIP Registration SIP Settings Period to be used for the session Transport NAT Settings Transport SettingsQoS ICEMedia Settings Recommend enabling this feature only for test purposes Call SettingsAdvanced Audio Settings Access Control RF SettingSIP ID Importing and Exporting Configuration SettingsDownloading the System Log Package Call Status Microphones On/Off Power On/Off the System ComponentsDialer On/Off Speaker On/OffMicrophones Battery ExchangeDialer Speaker Connecting using AUX in / AUX OUTPCS-HG90 Troubleshooting Microphone, Speaker, or Dialer not paired with Base Station LED IndicatorsDevice LED Indicator Status Speaker not in Charger Base Reset to Factory Defaults Technical SpecificationsCharger Base FCC Notice to Users Regulatory InformationIndustry Canada Notice to Users European Union Usage Restriction Restricted use with certain medical devicesExport Law Assurance North American Upcs Usage RestrictionModel Model Numbers Declaration of ConformityLimited Warranty Limited Warranty and Limitation of LiabilityDisclaimer Preamble GPL Licensed SoftwarePage Page Page No Warranty Technical Support