Conference Call
There are two ways to start a conference call:
1.Press the ‘Enter’ key to access the Active Call Menu and select ‘Conference’.
2.Create the second call by selecting Dialer, Contacts, or Recent.
3.Initiate the second call.
4.After the second call has been established, merge the two calls by pressing the left arrow key, which switches the dialer screen back to Active Call (1), and then press the ‘Join’ key.
OR
1.While in an active call, press the right arrow key to initiate a second call via the dialer screen. Enter the number, and press the green ‘Call’ button to dial the number. Please note that the caller on the active line is not put on hold until the green ‘Call’ button is pressed.
2.Once the second call is active, using the left and right arrow keys you can highlight the different lines on your handset. ‘Swap’ allows swapping the two calls; ‘Join’ will join the two calls in a conference call.
Call Waiting
1.While a call is active and the FLX2 System receives a second call, the Speaker or Dialer will play the call waiting indication tone.
2.If available, the FLX Dialer displays the incoming caller number and name.
3.The FLX Dialer presents the user with the option to ‘Answer’ or ‘Decline; the call.
4.If no action is taken and the second call aborts, the FLX Dialer will show the previous Active call screen again.
5.When answering the second call, the first call is put on hold.
6.To terminate either call, make that call the active call, and then press the red ‘End’ key. The other call will not be affected by this, you can select ‘Resume’ to continue that call.
24