Revolabs 10-FLX2-200-VOIP 10-FLX2-020-VOIP 10-FLX2-002-VOIP 10-FLX2-101-VOIP Static IP Settings

Page 56

Static IP Settings

Static IP Address

The Static IP Address is the IP address that the network

 

administrator has assigned to the phone.

Subnet Mask

Subnet Mask is used to determine the subnet to which the phone

 

belongs, for example, 255.255.255.0.

Default Gateway

The Default Gateway is the phone’s default router on the IP

 

network. It is usually the router connecting the internal network with

 

the outside network.

Domain Name

This is the network domain name.

Primary DNS

This is the address of the primary Domain Name System (DNS)

Server

server that translates domain names into IP addresses. Sites often

 

configure a primary DNS server and a secondary backup DNS

 

server.

Secondary DNS

This is the address of the secondary DNS server.

Server

 

SIP Registration

 

The SIP Registration page is used to configure the SIP registrar and proxy settings and the SIP account and user settings for the phone. The minimum number of information required to register your phone is the Registrar, the Username and Password. If ID and Display Name are not set, FLX will use the user name for both of these parameters. Some IP PBXs an ID different from the user name to be set. You must register successfully to the SIP registrar before you can make calls with your FLX.

The figure below shows the SIP Registration page. After changing any settings, the changes must be saved and the phone must be restarted for the changes to take effect.

56

Image 56
Contents Revolabs FLX2TM ModelsPage Safety Warnings IntroductionContents GPL Licensed Software GNU General Public License General Information Connecting the Charger Base Quick setup for VoIP Conference CallsConnecting the Base Station VoIP configuration Making a callDescription UnpackingInstalling FLX2 Components FLX2 Base StationFLX2 Charger Base FLX Dialer FLX Speaker FLX Microphones Initial Setup VoIP configurationConnecting System Cables From the FLX HandsetCalling Configurations Speaker ModeManaging a Call From the FLX Web InterfaceHandset Mode Bluetooth CallVoIP Call Video Conference CallFLX Home Screen Page Placing a VoIP Call Answering an Incoming Call Declining an Incoming VoIP CallEnding a Telephone call Calling a Directory ContactActive Call Management Caller IDPlacing a Call on Hold Muting a CallActive Call Menu Conference Call Call WaitingComponent behavior in and out of the Charger Base DialerSpeaker MicrophonesBluetooth Activating BluetoothManaging the Device Registry Device ListAdding a Device Accepting Device Connection Request Viewing Device DetailsRemoving a Device Setting Device Trust Level Making a call via BluetoothAnswering a call via Bluetooth Connecting a Video Conference System Configuring the Analog AudioVideo Conference Collaboration Making a Video CallMixing the audio signals Menu Navigation FLX2 System ConfigurationMenu Hierarchy Call Recent Caller Recent CallsRecent Call Log Delete Recent Call Entry View Recent Call InformationSave Recent Caller as Contact Contacts Delete Call HistoryView Contact List Add a ContactEdit a Contact Delete a ContactCall Contact Search for ContactView Contact Information Speaker Volume Audio ControlSet Speed Dial Calling a Speed Dial NumberRinger Equalizer EQAudio Mixer Mute / UnMuteSystem Info Device StatusSystem Information Bluetooth SetupHome CallBluetooth, Audio Date/TimeAdvanced Setup Mic AudioAux Audio Admin Settings Web Access on / OFF Microphone LED Pairing Indicators Speaker Indicator StatusWeb Interface Enabling Web AccessConnecting to the FLX Web Interface Home User Settings AudioSettings below can be changed at any time during a call Call ForwardingDate/Time Logging Out of the Web Session Administrator SettingsRestarting the Phone Network Settings Static IP Settings SIP RegistrationSIP Registration SIP Settings Period to be used for the session Transport Transport Settings NAT SettingsICE QoSMedia Settings Call Settings Recommend enabling this feature only for test purposesAdvanced Audio Settings RF Setting Access ControlImporting and Exporting Configuration Settings SIP IDDownloading the System Log Package Call Status Power On/Off the System Components Dialer On/OffSpeaker On/Off Microphones On/OffDialer Battery ExchangeMicrophones Connecting using AUX in / AUX OUT SpeakerPCS-HG90 Troubleshooting LED Indicators Microphone, Speaker, or Dialer not paired with Base StationDevice LED Indicator Status Speaker not in Charger Base Technical Specifications Reset to Factory DefaultsCharger Base Industry Canada Notice to Users Regulatory InformationFCC Notice to Users Restricted use with certain medical devices Export Law AssuranceNorth American Upcs Usage Restriction European Union Usage RestrictionDeclaration of Conformity Model Model NumbersLimited Warranty and Limitation of Liability Limited WarrantyDisclaimer GPL Licensed Software PreamblePage Page Page No Warranty Technical Support