Radio Shack 4-Line System Speakerphone with Caller ID and Headset Jack Making AN Intercom Call

Page 20
INTER-

5.When you finish the conversation, press

SPKR PHONE to hang up.

Be sure to replace the headset jack's rubber cover when you finish using a headset.

Note: Connecting a headset disconnects the handset's earpiece and microphone.

ˆIntercom and Paging Operation

You can call other stations connected to the same phone line using either the intercom or the paging feature.

Using the phone's intercom feature lets you make a telephone call to another station so you can conduct a two-way conversation when the called station answers.

Using the phone's paging feature lets you announce your message directly to one or all of the stations instead of making the stations ring.

If no station answers, your page is sim- ply making a one-way call.

When a station answers, your page changes into an intercom call.

MAKING AN INTERCOM CALL

Before you make an intercom call, check the intercom status indicator to be sure no one else is using the intercom.

Indicator

Status

 

 

 

 

Off

Not in use

 

 

Displays steadily

In use by another station

 

 

Flashes rapidly

Receiving an intercom call

 

 

Flashes once

In use/Making an intercom

every 2 seconds

call

 

 

1.Press INTERCOM to use the intercom with the speakerphone or headset. ICM

appears, and you hear a steady tone through the speaker or headset.

Or, lift the handset, then press

COM. ICM appears and you hear a steady tone through the handset.

2.Within 10 seconds, enter the extension number (11 to 22) for the station you want to call. That station's intercom indi- cator flashes rapidly, and that station repeatedly sounds a double ring.

Notes:

If the called party does not answer your intercom call, you can page that station by pressing PAGE.

If you do not dial the extension number within 10 seconds after pressing INTER- COM, the telephone sounds a steady tone and you must redial.

You can use the upper memory location buttons to dial an extension number. For example, use the first location button to dial extension 11, the second location button to dial extension 12, the third location button to dial extension 13, and so on.

If the called station's DND feature is acti- vated, or the called station is busy, your telephone sounds an intercom busy sig- nal.

An intercom call to one station can be answered by any other station.

20

Intercom and Paging Operation

Image 20
Contents Line System Speakerphone Read this Before Installation Important InformationImportant Caller ID Information FCC StatementFCC Wants YOU to Know LightningContents Troubleshooting Caller ID Features FeaturesTelephone Features Installation Installing Backup BatteriesSelecting a Location On a Desk TopOn a Wall or Wall Plate Handset Holder Setting Extension Numbers Setting the Dialing ModeSetting the Date and Time PreparationEnabling and Disabling Telephone Lines Setting the Area CodeAdjusting the Ringer Volume Resetting the Phone JAN 01 FRITelephone Operation Line StatusLine Lock Making and Answering a CallSwitching Between the Handset and the Speakerphone Adjusting the VolumeUsing PAUSE/REDIAL Using Auto RedialUsing Flash Using HoldUsing Privacy Using the Timer Using DND do not Disturb Conference Calling With Two Outside Callers With One Outside Caller and One or More Internal StationsUsing Tone Services on a Pulse Line Using the Index CardMemory Dialing Storing Numbers into MemoryUsing AN Optional Headset Intercom and Paging Operation Making AN Intercom CallAnswering AN Intercom Call Paging ONE StationPaging ALL Stations Answering aCaller ID Messages Caller ID OperationTransferring a Call Deleting Caller ID Records Reviewing Caller ID RecordsStoring Numbers from Caller ID Records Using CALLER/DIAL Press LOWER, then repeatedly pressTroubleshooting Problem SuggestionCare Page Limited One-Year Warranty