Radio Shack 4-Line System Speakerphone with Caller ID and Headset Jack owner manual Care

Page 26

Problem

Suggestion

 

 

 

 

The phone does not work or works

Be sure the phone line cords and AC adapter are properly

poorly.

and securely connected.

 

 

 

Be sure the batteries are fresh and are properly installed

 

(see “Installing Backup Batteries” on Page 7).

 

 

 

Be sure TONE/PULSE is set to the correct mode.

 

 

The phone does not work while using the

Be sure the headset is securely connected.

headset.

 

 

 

If you still have problems, disconnect the phone. If other phones on the same line function properly, the problem is in the phone or its installation. If you are unable to locate the problem, take the phone to your local RadioShack store for assistance.

CARE

Keep the phone dry; if it gets wet, wipe it dry immediately. Use and store the phone only in normal temperature environments. Handle the phone carefully; do not drop it. Keep the phone away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

Modifying or tampering with the phone’s in- ternal components can cause a malfunction and might invalidate its warranty and void your FCC authorization to operate it. If your phone is not performing as it should, take it to your local RadioShack store for assis- tance. If the trouble is affecting the telephone lines, the phone company can ask you to dis- connect your phone until you have resolved the problem.

26

Troubleshooting

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Line System Speakerphone Important Caller ID Information Read this Before InstallationImportant Information FCC StatementFCC Wants YOU to Know LightningContents Troubleshooting Caller ID Features FeaturesTelephone Features Installation Installing Backup BatteriesSelecting a Location On a Desk TopOn a Wall or Wall Plate Handset Holder Setting the Date and Time Setting Extension NumbersSetting the Dialing Mode PreparationEnabling and Disabling Telephone Lines Setting the Area CodeAdjusting the Ringer Volume Resetting the Phone JAN 01 FRILine Lock Telephone OperationLine Status Making and Answering a CallUsing PAUSE/REDIAL Switching Between the Handset and the SpeakerphoneAdjusting the Volume Using Auto RedialUsing Privacy Using FlashUsing Hold Using the TimerWith Two Outside Callers Using DND do not DisturbConference Calling With One Outside Caller and One or More Internal StationsMemory Dialing Using Tone Services on a Pulse LineUsing the Index Card Storing Numbers into MemoryUsing AN Optional Headset Intercom and Paging Operation Making AN Intercom CallPaging ALL Stations Answering AN Intercom CallPaging ONE Station Answering aCaller ID Messages Caller ID OperationTransferring a Call Deleting Caller ID Records Reviewing Caller ID RecordsStoring Numbers from Caller ID Records Using CALLER/DIAL Press LOWER, then repeatedly pressTroubleshooting Problem SuggestionCare Page Limited One-Year Warranty
Top Page Image Contents