Clearing Memory Numbers
To clear a number stored in an upper memo- ry position, press PROGRAM then the desired memory location button.
To clear a number stored in a lower memory position, press PROGRAM, LOWER then the desired memory location button.
The telephone rings once to indicate the number is cleared.
Entering a Pause
In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an out- side number. You can store the access code with the phone number; however, you must also store a pause after the access code to allow the outside line time to connect. To en- ter a
Note: You must enter at least one digit be- fore you can store a pause.
Dialing Stored Numbers
To dial a number stored in memory, lift the handset or press SPKR PHONE. To use a line other than 1, press the line button then:
To dial a number stored in upper memory, press the desired memory location button.
To dial a number stored in lower memory, press LOWER then the desired memory loca- tion button.
Chain-Dialing Service Numbers
For quick recall of numbers for special ser- vices (such as alternate long distance or bank by phone), store each group of num- bers in its own memory location.
To use the stored special service informa- tion, dial the service's main number list. Then, at the appropriate place in the call, press LOWER (if necessary) then the button for the location where the additional informa- tion is stored.
Testing Stored Emergency Numbers
If you stored an emergency service's number (police department, fire department, ambu- lance) and you choose to test the stored number, make the test call during the late evening or early morning hours to avoid peak demand periods. Also, remain on the line to explain the reason for your call.
USING AN OPTIONAL HEADSET
Your phone is equipped with a headset jack on the base. This jack allows you to connect an optional headset (not supplied) so you can move around within the headset cord's length.
Follow these steps to use a headset:
1.Gently pull up the cover on the 
jack on the right side of the base then insert the headset's
2.Route the headset cord through the strain relief slot at the right side of the phone.
3.Place the headset on your head with the earpiece over either ear and adjust the microphone boom until it is about even with your chin.
4.Press SPKR PHONE to make or receive calls.
Telephone Operation | 19 |