Incoming | TalkSwitch Jacks | ||
Phone Lines | |||
|
|
| E1 E2 E3 E4 |
|
|
| |
|
|
|
|
Line Splitter
Extensions 111 and 112
C O N N E C T I N G P H O N E S , F A X E S A N D D E V I C E S T O T A L K S W I T C H
CONNECTING PHONES: TWO LINE PHONE - OPTION 2
Call Handling:
TalkSwitch extensions 111 and 112 are wired to a two line phone using a line splitter. When a call is transferred to extension 111, line 1 on the phone will show as active; similarly calls on extension 112 will show line 2 as active.
Through the software, you may configure each incoming line to ring any given number of extensions, including all extensions. However, be careful if incoming line 1 is con- figured to ring both extensions 111 and 112. An incoming call will ring both phone lines at the same time. Instead configure incoming line 1 to ring extension 111, and line 2 to ring extensions 112.
To Tel. Line L1 or L1/L2
Line Splitter
Ext 111
To Jack E1
Ext 112
To Jack E2
Connect the male end of the line splitter into the telephone jack labeled “L1/L2”
To Tel. Line L2
Line Splitter
L1 and L2 are single line (2 pin) female connectors that join to a two line (4 pin) male connector. A 4 pin female receptical will indicate that you have a duplexer and not a line splitter.
Male (4 pin)
L1 (2 pin) | L2 (2 pin) |
Each phone line is connected to the line splitter via a single line
Single Line
W W W.T A L K S W I T C H . C O M | 6 |