Save Settings to TalkSwitch | Talkswitch E3 instruction

C O N N E C T I N G P H O N E S , F A X E S A N D D E V I C E S T O T A L K S W I T C H

3.4 Save Settings to TalkSwitch

New settings must be saved to the TalkSwitch phone system for them to take effect.

Choose ‘File’ then ‘Save to TalkSwitch’. A progress bar will show the data exchange to the TalkSwitch unit and should take only a few seconds to complete.

3.5 Connect Fax to TalkSwitch

Connect the fax machine to the back of the TalkSwitch unit, as shown below. The connections should correspond to the settings you have made in the software.

Fax Machine	Incoming Telephone	Fax Machine	Incoming Telephone
Connected to	Line with Distinctive Ring	Connected to	Line with Distinctive Ring
Extension 113		Extension 118

TalkSwitch 24-CA fax connections

TalkSwitch 48-CA and 48-CVA fax connections

3.6 Reconnect Phones and other Devices to TalkSwitch

You may wish to add the following telephone equipment. It is not necessary to add

all these devices or lines

Additional		Additional Incoming

Incoming
		Voice Phone Lines
Voice Phone Line

Incoming Telephone	Incoming Telephone
Line with Distinctive Ring	Line with Distinctive Ring
TalkSwitch 24-CA office connections
	TalkSwitch 48-CA and 48-CVA office connections

W W W.T A L K S W I T C H . C O M

1 1