21.4.99 | gigam101.fm5 | Gigaset V.24 Adapter |
Putting into service
Installing the program package
Prerequisites for installation
For installation, you need:
●an
–Win 95, Win 98 or Win NT operating system
–2 MB free hard disk memory
–1 free V.24/RS232 serial interface as COM port
●the
Installation
●Start up the PC and close down any programs active after
●Disconnect any Gigaset M101 Data units from the power supply and the PC.
●Insert the data carrier supplied in the drive.
●Under Start, select Settings, then Control Panel. Double- click the Software icon.
●Select Install. The installation program starts. During instal- lation, the message "No Gigaset M101 Data connected". Confirm this message with "OK".
●Terminate the configuration program with "OK"; this con- cludes the installation operation.
Check installation is successful
The following errors can occur during installation:
Problem | Result |
Insufficient memory | Error message, please try free- |
| ing some disk space on your |
| hard drive. |
No COM port free at the | Error message, setup can be |
PC | completed. |
Installation interrupted by | All components already in- |
user | stalled are removed. |
PC crashes during | Automatic correction during |
installation | next attempt. |
Installation of a new | Recognition, warning and instal- |
version | lation after confirmation. |
If no errors occur, all files are installed in the selected language version and your PC contains a "Gigaset M101 Data" program group. This contains the "Set Gigaset" configuration program, a help function and a text file with current information.
9