Siemens M101, RS232 operating instructions Technical data, Temperature and ambient conditions

Page 21

21.4.99

gigam101.fm5

Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1

What happens if...

Temperature and ambient conditions

The Gigaset M101 Data is designed for operation in protected rooms with a temperature range from +5°C to +45°C.

Do not set up the Gigaset M101 Data in damp environments, such as a bathroom or laundry room. Do not expose it to direct sunlight or other heat sources, such as radiators.

Technical data

Standard:

DECT = Digital Enhanced Cordless Telecommunications

Number of channels:

120 duplex channels

Radio frequency range:

1880 MHz to 1900 MHz

Duplex system:

Time division multiplex, 10 ms frame length

Channel spacing:

1728 kHz

Modulation:

GFSK

Voice coding:

32 kbit/s

Transmitted power:

10 mW, average rating per channel

Range:

up to 300 m outdoors,

 

up to 50 m indoors

Power supply:

Base station 220/230 V ~/ 50 Hz (plug-type AC adapter)

Power consumption (base station):

Stand-by mode: approx. 3 W

 

Data transfer mode: approx. 5 W

Permissible ambient conditions for

+5 °C to +45 °C

operation:

20% to 75% relative humidity

AC power plug:

TSV 6/6 (housing), Euro plug (plug-type AC adapter)

V.24/RS232 port:

9-pin Sub-D male/female

Standards complied with:

DECT in accordance with CTR 6

 

Electrical safety in accordance with EN 60950

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Gigaset M101 Data Registering a Gigaset M101 Data Setting the operating mode Back Overview FrontContents Contents Approval and conformity Safety precautions Introduction What is a Gigaset M101 Data?Putting into service Putting into serviceChecking the contents of the package Prerequisites for installation Putting into service Installing the program packageInstallation Check installation is successfulPutting into service Connecting stations Initial configuration Initial configurationConfiguration program options Configuration program optionsStarting the configuration program GeneralConfiguration program options Connection tab Upper section connecting to the PCLower section radio connection Setting the operating mode Configuration program options Operating mode tabSpecial settings for Direct connection mode Local station tabChanging a name Changing a station type Click Register Registering an Teilnehmer station De-registering a Teilnehmer station Partner station tab Changing the name Changing the PINLEDs and buttons LEDs and buttonsBoth button functions LED 1 Gigaset M101 Data statusPlace of installation What happens ifWhat happens if Temperature and ambient conditions Technical dataV.24 interface Signals toName Based on Ccitt Meaning Std. Pin Assign Pin plug based on Ccitt Pole SubD socketWhy set a mode? Technical background Tips & tricks, settings Tips & tricks, settingsOperating from a local station with two remote stations TeilnehmerPC PC direct cable connection via RS232/V.24 interface Setting the direct connection to the correct baud rate Set direct cable connection parameters Activate Hardware under Use flow control in the Settings Tips & tricks, settings Tips & tricks, settings Tips & tricks, settings Sharing files MAC and other operating systems PC PC direct cable connection problems examplesMeaning of lokale Station and Partnerstation Meaning of Basis and TeilnehmerSupport Updates and news on the InternetProblems with application programs Fault Cause Configuration management Fault CauseHardware problems PC, modem, Isdn TA Fault Cause Solution Fault Cause SolutionElsa TagGo2000 / Isdn con Acer Isdn T30 terminalWith Elsa Microlink 56k Miscellaneous Fault Cause Solution
Top Page Image Contents