Siemens 30ISDN operating instructions Program the multiple subscriber numbers MSNs, Ntba

Page 12

Putting the telephone into operation

Note that the NTBA must be connected to the power grid.

The Profiset 30isdn takes the necessary power from this

NTBA.

In order to avoid unauthorized unplugging of the telephone connecting cord from the telephone socket, the plug is protected. Use a small screwdriver or the like to unplug the connector.

Step 3: Entitle the device to operate in restricted powering conditions

The restricted powering switch is located on the under- side of the device. The recessed sliding switch can be moved with a screwdriver.

If the switch points to the symbol A , your telephone is entitled to operate in restricted powering conditions that means that the important telephone functions can still be used.

If you connect more than one unit to your ISDN connection, only one unit can be operated during restricted powering. Mark this unit accordingly!

Step 4: Program the multiple subscriber numbers (MSNs)

Display after connecting the telephone

a

We recommend that you enter the MSNs when first putting the telephone into operation, because only then you can use all the functions of your telephone. The MSNs (Multiple Subscriber Numbers) are the call numbers you were assigned for your ISDN connection.

These numbers are entered as follows:

00.00.00 00:00

Handset is on-hook.

S01 T Enter “1“ for MSN 1

TEnter the MSN

P

01 _

P

01 1 _

P

33758_

The input of the first MSN is completed. Repeat these

Ssteps for the second and third MSN.

4

Image 12

Contents Profiset 30isdn Profiset 30isdn Profiset 30isdnYour guide to this manual Profiset 30isdn Overview Profiset 30isdn Profiset 30isdn Overview Keys Safety precautions and approval Safety precautionsLocation of the telephone Profiset 30isdn Approval and conformity Contents Isdn glossary IndexSymbols used in these operating instructions Putting the telephone into operationPutting the telephone into operation Page Telephone connecting cord Putting the telephone into operation Connect the telephoneHandset cord coiled Program the multiple subscriber numbers MSNs NtbaSetting the national variants PBX operation only Program the trunk codePutting the telephone into operation Try out the telephone Calling another partyTaking a call Symbols Digit display line Display Idle modeDisplay-driven telephone operation Display-driven telephone operationConnected mode 030234577 001.20 045672343Outgoing and incoming calls Outgoing and incoming callsCalling users On-hook dialling Outgoing and incoming calls Number redial automatic dialling Is displayed Outgoing and incoming calls Accepting a call Rejecting a call DisconnectCall forwarding Deactivating the call signal Do not disturb Outgoing and incoming calls Call waitingAccepting call waiting Rejecting call waitingOutgoing and incoming calls Call list Retrieving entries from the call listDialling a number from the call list Storing a number from the call listCallback Deleting the call listInitiating a callback Ending a call disconnecting Accepting a callbackClearing a callback Switching to mute consultation in the room Convenient and secure telephone communicationConvenient and secure telephone communication Activating/deactivating open listeningConvenient and secure telephone communication Parking a call Resuming a parked callPage Keypad signalling Dtmf Switching between two calling parties toggling Calls involving two or more partiesCalls involving two or more parties Calling the second party consultationDisconnecting one party Three-party conferenceEnding a conference by disconnecting a party Calls involving two or more parties Ending a conferenceEnding a conference and toggling between parties Exiting from a conferenceProgramming keys on the telephone Programming keys on the telephoneProgramming the destination dialling keys Programming the speed dialling keysProgramming direct station selection babyphone Quick reference for available telephone settings Quick reference for available telephone settingsDescription Procedure Telephone settings Programming the telephone settings Programming the telephone settingsPassword Programming the telephone settings Ringer volume Ringer melodyS06 T 0 or Following settings are possible Call processing typeMultiple Subscriber Numbers MSN Programming the telephone settings National variants Page Date/time Call number for call forwarding unconditionalEnter the call number for call forwarding Save the setting Tariff unit factorProgramming the telephone settings Clearing the summation meter S14 TEnabling/disabling call waiting Programming the telephone settings Clearing memory Checking the settings statusDisplaying the software version Important information for installation and operation Important information for installation and operationMaintenance Removing and inserting the labelling cardsDefault settings Technical dataThird party use/disposal Siemens Service Symptom Cause Action Isdn glossary Isdn glossaryIsdn glossary Isdn glossary Quick reference guide Quick reference guideToggling d è R è R Quick reference for available telephone settings Index IndexTechnical data Page Siemens Aktiengesellschaft