Siemens 30ISDN operating instructions Default settings, Technical data

Page 50

Important information for installation and operation

ISDN supplementary services

	Your Profiset 30isdn supports a lot of ISDN services, e.g.
	toggle, park or conference.
	The selection of services available depends on your
	network operator and the selected tariff group (basic or
	enhanced connection).
	Contact your network operator for information on the
	services available.
Technical data
Power consumption:	Power supply by NTBA.
Permitted environmental conditions	+ 5 °C to + 40 °C
for operation:	20 % to 85 % relative air humidity
Signalling method:	ISDN DSS1
Dimensions(L x W x H):	170 x 210 x 92 mm
Weight:	590 g
Length of connecting cord:	Telephone connecting cord approx. 3 m
Connecting plug:	Mini western RJ45

Default settings

The Profiset 30isdn is delivered by the manufacturer with the following settings:

●National variant: Germany (49)

●MSN: not set

●Call processing type: point-to-multipoint

●Trunk code: not set

●Memories (Destination dialling, speed dialling, number redial, call list,direct station selection number, call number for call for- warding): empty

●Call forwarding: OFF

●Connection code for park/resume: 00

●Call waiting: permitted

●Calling line identification presentation (CLIP): permitted

●Locking function: OFF

●Display of charge/call time of active call: ON

●Display of charge/call time of last call: ON

●Tariff unit factor: 0,00

●Summation meter: empty

●Password: 0000

●Ringer volume: 2

●Ringer melody: MSN1: 1; MSN2: 2; MSN3:3

●Handset volume: 3

●Restricted powering switch: in OFF position (not entitled for operation in restricted pow- ering condition)

42

Image 50

Contents Profiset 30isdn Your guide to this manual Profiset 30isdnProfiset 30isdn Profiset 30isdn Overview Profiset 30isdn Profiset 30isdn Overview Keys Location of the telephone Safety precautions and approvalSafety precautions Profiset 30isdn Approval and conformity Contents Isdn glossary IndexPutting the telephone into operation Symbols used in these operating instructionsPutting the telephone into operation Page Handset cord coiled Telephone connecting cordPutting the telephone into operation Connect the telephone Program the multiple subscriber numbers MSNs NtbaSetting the national variants PBX operation only Program the trunk codeTaking a call Putting the telephone into operation Try out the telephoneCalling another party Display-driven telephone operation SymbolsDigit display line Display Idle mode Display-driven telephone operationConnected mode 030234577 001.20 045672343Calling users On-hook dialling Outgoing and incoming callsOutgoing and incoming calls Outgoing and incoming calls Number redial automatic dialling Is displayed Call forwarding Outgoing and incoming calls Accepting a callRejecting a call Disconnect Accepting call waiting Deactivating the call signal Do not disturbOutgoing and incoming calls Call waiting Rejecting call waitingDialling a number from the call list Outgoing and incoming calls Call listRetrieving entries from the call list Storing a number from the call listInitiating a callback CallbackDeleting the call list Clearing a callback Ending a call disconnectingAccepting a callback Convenient and secure telephone communication Switching to mute consultation in the roomConvenient and secure telephone communication Activating/deactivating open listeningConvenient and secure telephone communication Parking a call Resuming a parked callPage Keypad signalling Dtmf Calls involving two or more parties Switching between two calling parties togglingCalls involving two or more parties Calling the second party consultationDisconnecting one party Three-party conferenceEnding a conference and toggling between parties Ending a conference by disconnecting a partyCalls involving two or more parties Ending a conference Exiting from a conferenceProgramming the destination dialling keys Programming keys on the telephoneProgramming keys on the telephone Programming the speed dialling keysProgramming direct station selection babyphone Description Procedure Telephone settings Quick reference for available telephone settingsQuick reference for available telephone settings Password Programming the telephone settingsProgramming the telephone settings Programming the telephone settings Ringer volume Ringer melodyS06 T 0 or Following settings are possible Call processing typeMultiple Subscriber Numbers MSN Programming the telephone settings National variants Page Date/time Call number for call forwarding unconditionalEnter the call number for call forwarding Save the setting Tariff unit factorProgramming the telephone settings Clearing the summation meter S14 TEnabling/disabling call waiting Programming the telephone settings Clearing memory Checking the settings statusDisplaying the software version Maintenance Important information for installation and operationImportant information for installation and operation Removing and inserting the labelling cardsDefault settings Technical dataThird party use/disposal Siemens Service Symptom Cause Action Isdn glossary Isdn glossaryIsdn glossary Isdn glossary Toggling d è R è R Quick reference guideQuick reference guide Quick reference for available telephone settings Index IndexTechnical data Page Siemens Aktiengesellschaft