Programming the telephone settings
TEnter the call number for call forwarding.
SSave the setting.
The call charges incurred in connection with call forwarding (e.g. car telephone/mobil telephone) are not displayed on the Profiset 30isdn nor reg- istered on the summation meter.
The caller only pays for the connection between his or her phone and the initial destination; the remainder of the connection must be paid for by the party who has activated call forwarding.
Tariff unit factor
a
S15
T
T
S
Before you switch on the charge meter, you should enter the tariff unit factor, i.e. the costs calculated by your net- work operator for each call charge unit.
Handset is
Start the programming procedure.
Enter the password if necessary.
Enter the tariff unit factor.
Save the setting.
Note:
Enter the number of three decimal places for the tariff unit factor.
Activating/deactivating the display of charge/call time of the active call
a
S16
If the display of charge/call time for the active (current) call is activated, the display alternates between the call number and the call charge (if incurred)/call time.
Enter 0 or 1 to deactivate or activate the display of charge:
● | ”0“ | Display of charge /call time of the active call is |
|
| deactivated |
● | ”1“ | Display of charge /call time of the active call is |
|
| activated |
In the
Handset is
Start the programming procedure.
35