Siemens 30ISDN Programming the telephone settings Clearing memory, Checking the settings status

Page 47

Programming the telephone settings

Clearing memory

You can clear any of the following memories via input of certain codes:

●“0“ clear the destination dialling memory

●“1“ clear the speed dialling memory

●“2“ clear the call list memory

●“3“ clear the number redial memory

aHandset is on-hook.

S25	Start the programming procedure.
T	Enter the password if necessary.
0 ... 3	Press one of the keys 0 ... 3.
0 ... 3

SExit the programming procedure. The selected memory is cleared.

Checking the settings (status)

You can check the settings of your Profiset 30isdn. The display shows the two-digit code (➔ page 27: ”Programming the tele- phone settings“, ”Programming keys on the telephone“) which you start each programming procedure with and the currently set value. If the setting allows more than one value (e.g. MSN 1, 2 and 3, destination dialling keys 1 and 2, speed dialling keys 0- 9 a.s.o.) each memory and the relevant setting are displayed.

You can scroll forward and backward using the keys + and -.

The symbol “_“ on the display indicates values which are not yet set (e.g. not assigned MSN, destination dialling or speed di- alling keys)

You can view the current settings of the lock by entering the code “30“. The values displayed under the codes “40“ and “41“ could be necessary if you contact the hotline.

a or d	Handset is on-hook, or a call is in progress.
S00	Start the programming procedure.
T	Enter the password if necessary.
+ / -	Scroll through the settings via the +/- keys.

SExit the programming procedure.

39

Image 47

Contents Profiset 30isdn Your guide to this manual Profiset 30isdnProfiset 30isdn Profiset 30isdn Overview Profiset 30isdn Profiset 30isdn Overview Keys Location of the telephone Safety precautions and approvalSafety precautions Profiset 30isdn Approval and conformity Contents Index Isdn glossaryPutting the telephone into operation Symbols used in these operating instructionsPutting the telephone into operation Page Handset cord coiled Telephone connecting cordPutting the telephone into operation Connect the telephone Ntba Program the multiple subscriber numbers MSNsPBX operation only Program the trunk code Setting the national variantsTaking a call Putting the telephone into operation Try out the telephoneCalling another party Display-driven telephone operation SymbolsDigit display line Display Idle mode Display-driven telephone operation030234577 001.20 045672343 Connected modeCalling users On-hook dialling Outgoing and incoming callsOutgoing and incoming calls Outgoing and incoming calls Number redial automatic dialling Is displayed Call forwarding Outgoing and incoming calls Accepting a callRejecting a call Disconnect Rejecting call waiting Deactivating the call signal Do not disturbOutgoing and incoming calls Call waiting Accepting call waitingStoring a number from the call list Outgoing and incoming calls Call listRetrieving entries from the call list Dialling a number from the call listInitiating a callback CallbackDeleting the call list Clearing a callback Ending a call disconnectingAccepting a callback Activating/deactivating open listening Switching to mute consultation in the roomConvenient and secure telephone communication Convenient and secure telephone communicationResuming a parked call Convenient and secure telephone communication Parking a callPage Keypad signalling Dtmf Calling the second party consultation Switching between two calling parties togglingCalls involving two or more parties Calls involving two or more partiesThree-party conference Disconnecting one partyExiting from a conference Ending a conference by disconnecting a partyCalls involving two or more parties Ending a conference Ending a conference and toggling between partiesProgramming the speed dialling keys Programming keys on the telephoneProgramming keys on the telephone Programming the destination dialling keysProgramming direct station selection babyphone Description Procedure Telephone settings Quick reference for available telephone settingsQuick reference for available telephone settings Password Programming the telephone settingsProgramming the telephone settings Ringer melody Programming the telephone settings Ringer volumeCall processing type S06 T 0 or Following settings are possibleMultiple Subscriber Numbers MSN Programming the telephone settings National variants Page Call number for call forwarding unconditional Date/timeTariff unit factor Enter the call number for call forwarding Save the settingProgramming the telephone settings S14 T Clearing the summation meterEnabling/disabling call waiting Checking the settings status Programming the telephone settings Clearing memoryDisplaying the software version Removing and inserting the labelling cards Important information for installation and operationImportant information for installation and operation MaintenanceTechnical data Default settingsThird party use/disposal Siemens Service Symptom Cause Action Isdn glossary Isdn glossaryIsdn glossary Isdn glossary Toggling d è R è R Quick reference guideQuick reference guide Quick reference for available telephone settings Index IndexTechnical data Page Siemens Aktiengesellschaft