Siemens 30ISDN operating instructions Profiset 30isdn Overview Keys

Profiset 30isdn

Overview: Keys

S	Programming key
	To start or exit a programming procedure.
s	Locking key
	To activate/deactivate the total lock.
	To change the display for call numbers exceeding 12 digits.
R	Consultation key
	To initiate a consultation. To toggle between two parties.
	To accept a call in waiting. To terminate a three party conference.
W	Number redial key
	To dial the number dialled last with the handset off-hook.
	To view the number redial memory with the handset on-hook.
m	Mute key
	To switch off the microphone.
+	Plus key
	To increase the handset and loudspeaker volume during a call
	(the setting applys to the current call).
-	Minus key
	To lower the handset and loudspeaker volume during a call (the setting applys
	to the current call). To delete the previous character, when entering numbers or
	letters.
l	Loudspeaker key
	To change over to open listening. To activate on-hook preparation of dialling.

zDestination dialling keys To dial a stored call number.

jCall list key

To view the call list with the handset on-hook.

kSpeed dialling key

To dial a speed dialling number assigned to one of the digit keys.

eCall forwarding key

To activate/deactivate call forwarding.

fCallback key

To initiate/cancel callback.

gConference key

To set up/terminate a three-party conference.

hDisconnect key

To reject an incoming call or a call in waiting. To disconnect one party (if there are two calls in progress).To disconnect one party from a three-party confer- ence. To cancel a programming procedure without making any changes.

IV