Siemens 30ISDN operating instructions Programming the telephone settings

Page 44

Programming the telephone settings

TEnter the password if necessary.

0 or 1 Press key 0 or 1.

SSave the setting.

Activating/deactivating the display of charge/call time of the last outgoing call

a

S17

T

0or 1

S

The charge and call time for the last outgoing call (if it is activated) are displayed for approx. 10 seconds after the handset has been lifted and replaced.

Enter 0 or 1 to deactivate or activate the display of charge:

●	“0“	Display of charge /call time of the last outgoing
		call is deactivated
●	“1“	Display of charge /call time of the last outgoing
		call is activated

In the as-supplied condition, the display of charge/call time of th last outgoing call is activated.

Handset is on-hook.

Start the programming procedure.

Enter the password if necessary.

Press key 0 or 1.

Save the setting.

There may be differences between the device’s meter and the charge meter of the switching centre. The charge meter of the network opera- tor is definitive for the telephone bill.

36

Image 44

Contents Profiset 30isdn Your guide to this manual Profiset 30isdnProfiset 30isdn Profiset 30isdn Overview Profiset 30isdn Profiset 30isdn Overview Keys Location of the telephone Safety precautions and approvalSafety precautions Profiset 30isdn Approval and conformity Contents Isdn glossary IndexPutting the telephone into operation Symbols used in these operating instructionsPutting the telephone into operation Page Handset cord coiled Telephone connecting cordPutting the telephone into operation Connect the telephone Program the multiple subscriber numbers MSNs NtbaSetting the national variants PBX operation only Program the trunk codeTaking a call Putting the telephone into operation Try out the telephoneCalling another party Symbols Digit display line Display Idle modeDisplay-driven telephone operation Display-driven telephone operationConnected mode 030234577 001.20 045672343Calling users On-hook dialling Outgoing and incoming callsOutgoing and incoming calls Outgoing and incoming calls Number redial automatic dialling Is displayed Call forwarding Outgoing and incoming calls Accepting a callRejecting a call Disconnect Deactivating the call signal Do not disturb Outgoing and incoming calls Call waitingAccepting call waiting Rejecting call waitingOutgoing and incoming calls Call list Retrieving entries from the call listDialling a number from the call list Storing a number from the call listInitiating a callback CallbackDeleting the call list Clearing a callback Ending a call disconnectingAccepting a callback Switching to mute consultation in the room Convenient and secure telephone communicationConvenient and secure telephone communication Activating/deactivating open listeningConvenient and secure telephone communication Parking a call Resuming a parked callPage Keypad signalling Dtmf Switching between two calling parties toggling Calls involving two or more partiesCalls involving two or more parties Calling the second party consultationDisconnecting one party Three-party conferenceEnding a conference by disconnecting a party Calls involving two or more parties Ending a conferenceEnding a conference and toggling between parties Exiting from a conferenceProgramming keys on the telephone Programming keys on the telephoneProgramming the destination dialling keys Programming the speed dialling keysProgramming direct station selection babyphone Description Procedure Telephone settings Quick reference for available telephone settingsQuick reference for available telephone settings Password Programming the telephone settingsProgramming the telephone settings Programming the telephone settings Ringer volume Ringer melodyS06 T 0 or Following settings are possible Call processing typeMultiple Subscriber Numbers MSN Programming the telephone settings National variants Page Date/time Call number for call forwarding unconditionalEnter the call number for call forwarding Save the setting Tariff unit factorProgramming the telephone settings Clearing the summation meter S14 TEnabling/disabling call waiting Programming the telephone settings Clearing memory Checking the settings statusDisplaying the software version Important information for installation and operation Important information for installation and operationMaintenance Removing and inserting the labelling cardsDefault settings Technical dataThird party use/disposal Siemens Service Symptom Cause Action Isdn glossary Isdn glossaryIsdn glossary Isdn glossary Toggling d è R è R Quick reference guideQuick reference guide Quick reference for available telephone settings Index IndexTechnical data Page Siemens Aktiengesellschaft