BT 200 Wall-mounting your Paragon, To set the day and time, Press buttons in the order shown

Page 11

Paragon 200 - Edition 4.3 – 26th Sept ’00

8 Wall-mounting your Paragon 200

9To set the day and time

1 Turn around the handset clip to prevent the

handset from falling when the product is

wall-mounted.

Sel

Press buttons in the order shown

Press and release until TIME is shown on the display.

SETTING UP

WALLDESK

2Use the template on page 22 to drill holes in the wall. Leave a small gap between the screw heads and the wall.

WALL PLUG SCREW

WALL

OK	The prompt says “Please enter the day”.

Display the current day:

MON = Monday

TUE = Tuesday

WED = Wednesday

THU = Thursday

FRI = Friday

SAT = Saturday

SUN = Sunday

OK To confirm the day setting. The prompt

says “Please enter the time using the 24 hour clock”.

KEYPAD Enter the current time using the keypad. Use the 24 hour clock, e.g. 0930 = 9.30am; 1500 = 3.00pm.

3Place your Paragon 200 over the screw heads and slide down.

OK

To confirm the time setting.

The prompt now announces the day and time settings. The display will go back to showing the number

of messages.

8

Image 11

Contents Paragon UserGuideParagon 200 Edition 4.3 26th Sept ’00 Paragon 200 Edition 4.3 26th Sept ’00 Allows you to change the display contrast At a glanceDefault TB This guide Using the telephoneEnter your PIN here IntroductionUnpacking your Paragon For your recordsIt should not be used in bathrooms or near water Setting upInsert back-up battery Plan the location of your ParagonPlug the mains adaptor cord into the back of the telephone Check Dial Mode setting default TBConnect handset cord to base Connect the telephone line cordFit plinth for desk mounting and track cables Plug the mains adaptor into the wall socket and switch onPress buttons in the order shown Says Please enter the time using the 24 hour clockWall-mounting your Paragon To set the day and timeMaking and ending calls Using the telephoneUsing the Inductive Coupler To make a one-touch call Using the one-touch buttonsTo adjust the earpiece volume during a call To store a one-touch numberTo delete/change a quickdial number Using the quickdial memoryTo make a quickdial call To store a quickdial number To switch the answering machine on, off and to Answer Only Using the answering machineTo delete your personal OGM To record your own outgoing messageTo record a memo To delete all messages Message and Ring IndicatorTo playback your messages To privately playback your messages through the handsetTo use Caller Return Auto Using Remote AccessTo adjust the playback volume To switch on Caller Return To use Call ScreeningPIN. Wait to hear the confirmation To switch on your answering machineTo set your PIN To play back messages Use the keypad to enter your securityRinger Optional SettingsTo adjust the ring tone Prompt says Please select the ringer To adjust the ringer volumeTo adjust the display contrast General information SafetyGuarantee 0845 330 Help and adviceTechnical information If the power fails Wall-mounting template Index Rtte Offices worldwide

Related manuals

Manual 6 pages 4.13 Kb