BT 200 manual Connect handset cord to base, Connect the telephone line cord

Paragon 200 - Edition 4.3 – 26th Sept ’00

SETTING UP

2Connect handset cord to base

HANDSET

9V DC LINE

3Connect the telephone line cord

9V DC LINE

4Check Dial Mode setting (default TB)

Use the dialling mode switch on the underside of your Paragon 200.

Your Paragon 200 should be pre-set to TB which gives you Tone dialling. This ensures the phone will work with all modern digital exchanges.

P

T

TB

MODE

HANDSET

If you do not get a dialling tone, try setting the dialling mode to P.

If you are connecting to a switchboard, check with your switchboard operator or communications manager which dialling mode you need. Your Paragon 200 is approved for all compatible switchboards.

5Plug the mains adaptor cord into the back of the telephone

If you do not have a modern phone socket, call Freephone 0800 800 150 and ask for a BT engineer to come and fit the correct socket. This is a chargeable service.

9V DC LINE

CAUTION

DISCONNECT

6