BT 200 manual Message and Ring Indicator, To playback your messages, To delete all messages

Page 17

Paragon 200 - Edition 4.3 – 26th Sept ’00

Message and Ring Indicator

The indicator blinks when you have new messages or memos. When you have played them back, the indicator goes off.

It will also flash when the telephone rings.

To playback your messages

Press buttons in the order shown

To privately playback your messages through the handset

memo Play

Press the PLAY/MEMO button.

 

Lift the handset to listen to your messages through the handset.

Replace the handset to listen through the loudspeaker again.

To delete all messages

ANSWER MACHINE

memo Play

Del

memo Play

Your messages are played back in chronological order. The display will show the day and time the message was left. When all the messages have been played back, the prompt says “End of messages.”

During playback you also have the following options:

Skip to the next message.

Once to replay the current message or twice to replay the previous message.

Deletes the current message. The prompt says, “Message deleted” and the next message is played.

Pauses playback. The display flashes. Press again to resume. If you pause playback for more than 60 seconds, your Paragon 200 will automatically return to normal mode.

All messages are automatically saved after playback.

When the last message has finished playing.

Del

Display counts down from 8-0 at the

 

end of which the messages are deleted.

Note

If you have deleted a message in error you can press ANSWER ON/OFF during the countdown and it will cancel the deletion.

The display will show the number of messages.

14

Image 17
Contents Paragon UserGuideParagon 200 Edition 4.3 26th Sept ’00 Paragon 200 Edition 4.3 26th Sept ’00 Allows you to change the display contrast At a glanceDefault TB This guide Using the telephoneUnpacking your Paragon IntroductionFor your records Enter your PIN hereInsert back-up battery Setting upPlan the location of your Paragon It should not be used in bathrooms or near waterConnect handset cord to base Check Dial Mode setting default TBConnect the telephone line cord Plug the mains adaptor cord into the back of the telephoneFit plinth for desk mounting and track cables Plug the mains adaptor into the wall socket and switch onWall-mounting your Paragon Says Please enter the time using the 24 hour clockTo set the day and time Press buttons in the order shownMaking and ending calls Using the telephoneUsing the Inductive Coupler To adjust the earpiece volume during a call Using the one-touch buttonsTo store a one-touch number To make a one-touch callTo delete/change a quickdial number Using the quickdial memoryTo make a quickdial call To store a quickdial number To switch the answering machine on, off and to Answer Only Using the answering machineTo delete your personal OGM To record your own outgoing messageTo record a memo To playback your messages Message and Ring IndicatorTo privately playback your messages through the handset To delete all messagesTo adjust the playback volume Using Remote AccessTo switch on Caller Return To use Call Screening To use Caller Return AutoTo set your PIN To play back messages To switch on your answering machineUse the keypad to enter your security PIN. Wait to hear the confirmationRinger Optional SettingsTo adjust the ring tone Prompt says Please select the ringer To adjust the ringer volumeTo adjust the display contrast General information SafetyGuarantee 0845 330 Help and adviceTechnical information If the power fails Wall-mounting template Index Rtte Offices worldwide
Related manuals
Manual 6 pages 4.13 Kb