Guide to the Scanner
Understanding the Indicators
The scanner has the following indicators:
TH2H030E
1: | Power On | 1 | 2 | 3 | 4 |
2: | Machine Busy |
|
|
3:Document in Place
4:Error
When the scanner is in a normal operating state, the indicators will light in one of the combina- tions shown below. If the indicators light in any other pattern, an error has occurred. Refer to p. 28, “Error Indicators and Solutions.”
|
|
|
| Description |
|
|
|
|
|
❍ | ❍ | ❍ | ❍ | When the power has just been turned on, or the |
|
|
|
| Reset switch has been pressed (This combination |
|
|
|
| is displayed only for a few seconds.) |
|
|
|
|
|
❍ | ● | ● | ● | When there is no document in the Auto Docu- |
|
|
|
| ment Feeder, and no document is being scanned |
|
|
|
|
|
❍ | ● | ❍ | ● | When there is a document in the Auto Document |
|
|
|
| Feeder, but the document is not being scanned |
|
|
|
|
|
❍ | ❍ | ● | ● | When scanned data is being transferred (and there |
|
|
|
| is no document in the ADF) |
|
|
|
|
|
❍ | ❍ | ❍ | ● | When scanned data is being transferred (and there |
|
|
|
| is a document in the ADF) |
|
|
|
|
|
❍ | ● | ✕ | ● | When the scanner is ready for manual scanning |
|
|
|
|
|
✕ | ● | ● | ● | When the scanner is ready by Low Power Mode |
|
|
|
|
|
❍: On
✕: Flashing
●: Off
5